TECHNICAL DATA SHEET Effisus 2Bond DS Effisus 2Bond DS is a double-side adhesive and sealant tape based on innovative and advanced technology active sealants. Developed to permanent water seal two or more substrates and seal any kind of nail, screw or steel anchor perforations on a substrate or a membrane.

TECHNICAL DATA SHEET Effisus 2Bond DS Suitable for use in a wide range of construction substrates including EPDM, TPO, most PVC1) , CSPE/ Hypalon, CPE, SBS, APP modifieds, asphalt BURs, coal tar BURs, tiles, shingle, coated and non-coated aluminum and metal roofs, galvanized steel, gypsum board, wood, polyethylene, propylene, polystyrene, fiberglass, brick, concrete, masonry, OSB board, shielding membranes, etc. Based on the chemical arrangement of thermoplastics and non-curing Rubber (not butyl) with a primer encapsulated. Effisus 2Bond DS is permanently elastic and flexible between -57ºC and...

TECHNICAL DATA SHEET Others Use on concrete Effisus 2Bond DS Tape has exceptional properties even when applied on porous surfaces such as concrete. This adhesion capability allows the sealing of weatherproofing wall and roof membranes onto a concrete substrate. Technical data Surface Preparation The surface must be cleaned with Effisus Cleaner or similar. Remove any dust, debris, oil and grease and other contaminants. At temperatures below 5ºC treat the surface with Effisus RED+ Primer or Effisus Coat NP Primer. Application Remove one side of the 2Bond DS tape release liner and adhere it to the...