video corpo

Politerm Machine:H2O type 1000
2Pages

{{requestButtons}}

Catalog excerpts

Politerm Machine:H2O type 1000 - 1

Politerm Machine H2O type 1000 with electrical power supply MIXING MACHINE PUMP FOR LIGHTWEIGHT CONCRETES EQUIPPED WITH TECHNICAL CHARACTERISTICS Equipment completely in stainless steel for the preparation (mixture) and for the pumping of lightweight mortar prepared with virtual inert materials like virgin expanded polystyrene beads, regenerated expanded polystyrene beads, perlite, vermiculite and cork, also when mixed with foam made with appropriate equipment (type Foam Maker). The equipment is supplied with “Manual of installation, utilisation and maintenance” and “Declaration of conformity CE”as the current Directive. - Tank included for 200 lt. storage of mixing water with device stating de maximum level. - Digital device for de dosage of mixing water with direct introduction in the mixing tank. Mixing machine section: Mixing tank: Mixing blades: Double crossed flow Pump section: Pump motor: clutch belt transmission Pump capacity: Pumping maximum distance: Pumping maximum height General: Weight: HANDLING DEVICES • Eyes bolt for cranes’ cables • Openings for forklift STANDARD EQUIPMENT n° 3 reinforced pipes for carrying de mortar (30 metres in total) connections included n° 3 light plastics pipes for carrying the mortar (30 metres in total) connections included 25 metres of water pipe 25 metres of electrical cable with 3 phases hold + earthing 32A n° 1 additional water tank (capacity 300 litres) with tap n° 1 pump remote-control in parallel n° 2 “trollini” for the laying on the surface of the pumped mortar. All the indications provided in this technicalAvailable on demand data sheet are purely approximate and not binding for legal purposes. The data listed has been gathered from CUSTOMIZED laboratory tests and it hence follows that in practical applications on building sites the final characteristics of the products may be subject to substantial VERSION variations depending on the meteorological conditions and the installation. The user must always check suitability of the product for its specific use, undertaking all liability implicit in and deriving from use of the product, as well as comply with all the methods and instructions for use generally referable to “workmanlike” execution. Edilteco S.p.A. reserves the right to change the contents of this technical data sheet on its final judgement. The spreading of this data sheet, through any media, supersedes and cancels the validity of any other technical data sheet previously published. Edilteco S.p.A. Via dell’Industria, 710 - 41038 San Felice s/P (MO) - Italy - tel. +39 0535 82161 - fax +39 0535 82970 - info@edilteco.it - www.edilteco.it

Open the catalog to page 1
Politerm Machine:H2O type 1000 - 2

OPTIONAL EQUIPMENT Metallics pipes and ellbows (for the mortar pumping) Extracting tool for stator - Politerm Machine Screw powered (motorized for loading of cement into the tank): All the indications provided in this technical data sheet are purely approximate and not binding for legal purposes. The data listed has been gathered from laboratory tests and it hence follows that in practical applications on building sites the final characteristics of the products may be subject to substantial variations depending on the meteorological conditions and the installation. The user must always...

Open the catalog to page 2

All Edilteco catalogs and technical brochures

  1. F6-C

    1 Pages

  2. F4-C

    1 Pages

  3. F10

    1 Pages

  4. F8

    1 Pages

  5. F5

    1 Pages

  6. dry-holz

    2 Pages

  7. ECAP® L 100

    2 Pages

  8. ISOLSAN

    2 Pages

  9. ISOLTECO

    2 Pages

Archived catalogs

  1. dBRED F3-B

    1 Pages

  2. FONOTECH

    2 Pages