video corpo

ISOLTECO
2Pages

{{requestButtons}}

Catalog excerpts

ISOLTECO - 1

EDILTECO S.p.A. - Via dell’Industria, 710 – 41038 S.Felice sul Panaro (MO) – Italy .. +39 0535 82161 – fax +39 0535 82970 - .. info@edilteco.it www.edilteco.it Isolteco_2009]10]30 ing.doc ] Pagina 1 di 2 ISOLTECO Ready]mix plaster highly thermal insulating .. Packaging and storage: • Bags of 60 l yield • Pallets of 40 bags. • Storable for at least 6 months in a cool and dry place away from frost and water. .. Composition: Selected water binders pre]batched – perfectly spherical virgin expanded polystyrene beads with constant grain]size, mixed with special E.I.A ® ] additive – special additives. .. Fields of application • External thermal insulation. • Inside walls thermal insulation. • Ceiling thermal insulation. • Eliminates thermal bridges. • Protection of the walls from rain and moisture. .. Prerogatives: • For indoor and outdoor use (once applied and “maturated” it does not have problem in case of rain, moisture and low/high temperatures). • It can stay in the raw estate or can be refinished with smoothing and films of finishing of nearly every kid. • It strongly speeds the application time of the finishing smooth. • It guarantees an high thermal insulation. .. Consumption/yield: thickness yield per 1 bag 2 cm approx. 3,0 m² 3 cm approx. 2,0 m² 4 cm approx. 1,5 m² 5 cm approx.. 1,2 m² 6 cm approx. 1,0 m² .. Support preparation: Detailed indications: consult the manual “Isolteco–Application Manual” • The surface must be clean, sufficiently solid and absorbent, free from detached parts, dust and residual insulating materials. • Before the application of Isolteco, moisten the surface in the suitable ways according to the type of surface. • In case of low absorbing surface, apply on the entire surface an adhesion promoter like Edilstik and afterwards apply Isolteco on the still wet impregnated surface (fresh on fresh). • In case of very scarce absorbing surface or of high absorbing surface, before applying Isolteco, apply on the entire surface a scratch coat composed by a cement mortar prepared with Edilstik or apply the ready]mix scratch coat cement plaster (type Drymur Premix Spritz, Baumit AG20 or Baumit VorSpritzer). • Make the intermediate strips using exclusively Isolteco. Otherwise, also wooden boards or steel strips (bevelled type) can be used. After the application of Isolteco, the strips made with materials different from Isolteco will have to be carefully removed and the spaces left will have to be filled and levelled with Isolteco. The intermediate strips will have to be positioned not more than 2 m. apart. • The corners and the openings (like doors, windows and so on) will have to be prepared by applying steel staff angles of the type that has to be fixed by means of cement mortar or of the type that has to be fixed through screw anchors (the last ones, also called “flag staff angles” are recommended for thicknesses of 5 cm. and more). It is also possible to make the corners, during the application of Isolteco, with wooden boards. This method makes that the finished corners are less resistant to impacts.

Open the catalog to page 1
ISOLTECO - 2

All the indications provided in this technical data sheet are purely approximate and not binding for legal purposes. The data listed has been gathered from laboratory tests and it hence follows that in practical applications on building sites the final characteristics of the products may be subject to substantial variations depending on the meteorological conditions and the installation. The user must always check suitability of the product for its specific use, undertaking all liability implicit in and deriving from use of the product, as well as comply with all the methods and...

Open the catalog to page 2

All Edilteco catalogs and technical brochures

  1. F6-C

    1 Pages

  2. F4-C

    1 Pages

  3. F10

    1 Pages

  4. F8

    1 Pages

  5. F5

    1 Pages

  6. dry-holz

    2 Pages

  7. ECAP® L 100

    2 Pages

  8. ISOLSAN

    2 Pages

Archived catalogs

  1. dBRED F3-B

    1 Pages

  2. FONOTECH

    2 Pages