video corpo

ISOLTECO® WALL
2Pages

{{requestButtons}}

Catalog excerpts

ISOLTECO® WALL - 1

EDILTECO S.p.A. Via dell’Industria, 710 – 41038 S.Felice sul Panaro (MO) – Italy .. +39 0535 82161 – fax +39 0535 82970 e mail: info@edilteco.it - web: www.edilteco.com Isolteco Wall 050105_ing.doc - Rev. ING 10.2003 - Page 1 of 2 IISOLTECO WALL prrreeemiiixxxeeed plllaaasssttteeerrr wiiittth hiiigh tttheeerrrmaaalll iiinsssulllaaatttiiion poweeerrr specifically for use in air spaces and ventilated walls + Packaging and storage: .. Bags of 70 l yield. .. Pallet: 40 bags .. Storable for at least 6 months on a pallet in a cool and dry place away from frost and water. + Composition: Prebatched selected water binders - perfectly spherical virgin expanded polystyrene beads with constant grain size mixed with a special E.I.A. additive - special additives. + Fields of application: .. Thermal insulation in air spaces. .. Thermal insulation of ventilated walls. + Consumption/yield: Thickness 1 bag yields 2 cm approx. 3.50 m2 3 cm approx. 2.30 m2 4 cm approx. 1.75 m2 5 cm approx. 1.40 m2 6 cm approx. 1.17 m2 + Surface preparation: .. The surface must be clean, sufficiently solid, free of loose parts, dust and insulating material residues and must be sufficiently absorbent. .. Before applying Isolteco, moisten the surface using the methods suited to the type of surface. .. In the case of substrates with a low degree of absorption, apply an adhesion promoter type Edilstik over the entire surface and then apply Isolteco on the still wet surface (fresh on fresh). .. In the case of substrates with a very low degree of absorption, before applying Isolteco apply a scratch coat based on cement grout mixed with Edilstik additive over the entire surface, or use the ready-to-use scratch coat product Drymur Premix Spritz. .. The intermediate level strips must be made using exclusively Isolteco. Alternatively, wooden strips or bevelled metal strips can be used on the condition that after subsequent application of Isolteco, they are removed and the spaces left are filled and levelled with Isolteco. The level strips must not be less than 2 m apart. + Application: .. Application with plastering machine (recommended): it is essential to fit the plaster sprayer with a solid-blade helical mixer, an expansion tank specifically for lightweight products, a long-pitched screw and cap or nozzle 14 mm. .. Manual application: mix in a cement mixer or with a horizontal mixer hydrating the contents of a bag with about 10 litres of clean water. Mix for at least 5 minutes and not more than 10 minutes. .. Apply an initial layer of about 1 cm of Isolteco. After the first layer has set (not

Open the catalog to page 1
ISOLTECO® WALL - 2

All the indications provided in this technical data sheet are purely approximate and not binding for legal purposes. The data listed has been gathered from laboratory tests and it hence follows that in practical applications on building sites the final characteristics of the products may be subject to substantial variations depending on the meteorological conditions and the installation. The user must always check suitability of the product for its specific use, undertaking all liability implicit in and deriving from use of the product, as well as comply with all the methods and...

Open the catalog to page 2

All Edilteco catalogs and technical brochures

  1. F6-C

    1 Pages

  2. F4-C

    1 Pages

  3. F10

    1 Pages

  4. F8

    1 Pages

  5. F5

    1 Pages

  6. dry-holz

    2 Pages

  7. ECAP® L 100

    2 Pages

  8. ISOLSAN

    2 Pages

  9. ISOLTECO

    2 Pages

Archived catalogs

  1. dBRED F3-B

    1 Pages

  2. FONOTECH

    2 Pages