video corpo

ISOLSAN
2Pages

{{requestButtons}}

Catalog excerpts

ISOLSAN - 1

EDILTECO S.p.A. - Via dell’Industria, 710 – 41038 S.Felice sul Panaro (MO) – Italy .. +39 0535 82161 – fax +39 0535 82970 e mail: info@edilteco.it - web: www.edilteco.com Isolsan 2009-10-30_ing.doc- Rev. ING 01.2007 - Pagina 1 di 2 IISOLSAN Premixed dehumidifying plaster with high thermal insulating power ƒy Packagingand storage: .. Bags of 60 l. yield. .. Pallet: 40 bags .. Storable for at least 6 months in a cool and dry place on a pallet, away from frost and water. ƒy Composition: .. Macro]porous water binding mixed with Drymur, selected and pre]dosed. .. Virgin expanded polystyrene beads, perfectly spherical with uniform grain size, mixed with special E.I.A. additive. .. Special additives. ƒy Fields of application: .. Dehumidification, renovation and external thermal insulation for walls that suffer of rising dump. .. Dehumidification, renovation and thermal insulation of perimetrical and dividing walls that suffer of rising dump. .. Dehumidification, renovation and thermal insulation of ceilings. .. Elimination of thermal bridges. .. Protection of walls from rain. ƒy Consumption /yield: Thickness Yield per 1 bag cm. 2 approx. 3,0 m² cm. 3 approx. 2,0 m² cm. 4 approx. 1,5 m² cm. 5 approx. 1,2 m² cm. 6 approx. 1,0 m² ƒy Support preparation: For the detailed methods of use and application consult the manual “Isolsan – Application Manual”. .. The surface must be clean, sufficiently solid and absorbent, without detached parts, residual insulating materials, dust. Pay particular attention during the clean out of each possible traces of pre]existent gypsum based mortars. .. In case, before the application of Isolsan, it is necessary to fill traces and volumes, etc., these fillings must be done with mortar made of sand, lime and cement and mixed with Drymur. .. Before the application of Isolsan, wet the surface in the suitable ways according to the type of surface. .. In case that on the laying surfaces there are salts or salt blooming, before applying Isolsan, make a suitable anti]salt treatment (made with high impregnation liquid like Tecosel, followed by cement base made with Drymur Premix Spritz, with Baumit SanovaVorspritzer or with mortar based of sand, lime and cement and mixed with Drymur). .. Make the intermediate strips using exclusively Isolsan. Otherwise, also wooden boards or steel strips (bevelled type), can be used. After the application of Isolsan, the strips made with materials different other than Isolsan will have to be carefully removed and the spaces left will have to be filled and levelled with Isolsan. The level strips will have to be positioned not more than 2 ml. apart.

Open the catalog to page 1
ISOLSAN - 2

EDILTECO S.p.A. ] Via dell’Industria, 710 – 41038 S.Felice sul Panaro (MO) – Italy .. +39 0535 82161 – fax +39 0535 82970 e mail: info@edilteco.it ] web: www.edilteco.com Isolsan 2009-10-30_ing.doc- Rev. ING 01.2007 - Pagina 2 di 2 .. The corners and the openings (like doors, windows, etc.) must be prepared by applying steel staff angels of the type that has to be fixed by means cement mortars or of the type that has to be fixed through screw anchors (the last ones, also called “flags staff angles” are recommended for thickness of 5 cm and more). It is also possible to make the corners,...

Open the catalog to page 2

All Edilteco catalogs and technical brochures

  1. F6-C

    1 Pages

  2. F4-C

    1 Pages

  3. F10

    1 Pages

  4. F8

    1 Pages

  5. F5

    1 Pages

  6. dry-holz

    2 Pages

  7. ECAP® L 100

    2 Pages

  8. ISOLTECO

    2 Pages

Archived catalogs

  1. dBRED F3-B

    1 Pages

  2. FONOTECH

    2 Pages