video corpo

ECAP® L 100
2Pages

{{requestButtons}}

Catalog excerpts

ECAP® L 100 - 1

EDILTECO S.p.A. - Via dell’Industria, 710 – 41038 S.Felice sul Panaro (MO) – Italy .. +39 0535 82161 – fax +39 0535 82970 - .. info@edilteco.it www.edilteco.it Pagina 1 di 2 ECAP L 100 Prefabricated thermal insulating boards in EPS class 100 ƒy Packaging and storage: .. Board with straight edge 600 mm. x 1200 mm. (0,72 sqm) .. Standard thicknesses: mm. 30 – 40 – 50 – 60 – 70 – 80 – 90 – 100 – 120 – 150 – 180 - 200 (in addition there is the smoothing mortar thickness which is approximately 3 mm.) .. Pallet: box on pallet 120x120x120 (h) cm. .. Keep in a cool and dry place, sheltered from frost and water. ƒy Composition: .. Thermal insulating board in EPS class 100 (various thicknesses). .. Cement based smoothing mortar (approx. thickness 3 mm.) .. Alkali-resistant, dimensionally stable fibreglass mesh 160 gr./m² covered by the smoothing mortar and with prearranged overlaps. .. Punched holes for the insertion of the anchors. ƒy Fields of application: .. External thermal insulation. .. Internal thermal insulation for walls and ceilings. .. Thermal insulation of prefabricated building. .. Refurbishing and renovation of façades. .. Elimination of thermal bridges. .. Protection of the façades from rain. ƒy Surface preparation and application: See the “Ecap manual of use and application”. ƒy Warnings: .. Do not apply under the direct sunlight or with temperatures higher than +35°C. If the gluing and the smoothing mortar is made under the direct sunlight, the necessary precautions must be taken (e.g. the meshes covering the scaffolding or other). .. Do not apply under the rain, at the temperature lower than +5°C or with the risk of frost. .. Apply with relative humidity between 45% and 80%. Do not apply with relative humidity too low. .. For the detailed methods of use and application consult the “application Manual”, or contact the Edilteco Technical Department. Technical characteristics of the components: Thermal insulating board in EPs class 100 Description Codification according to UNI EN 13163 Unit of measurement Value Norm • Length L2 mm + 2 EN 822 • Width W2 mm + 2 EN 822 • Thickness T2 mm + 1 EN 823 • Orthogonally S2 mm/mm + 2/1000 EN 824 • Planarity P4 mm + 5 EN 825

Open the catalog to page 1
ECAP® L 100 - 2

All the indications provided in this technical data sheet are purely approximate and not binding for legal purpose. The data listed has been gathered from laboratory tests and it hence follows that in practical applications on building sites the final characteristics of the products may be subject to substantial variations depending on the meteorological conditions and the installation. The user must always check suitability of the product for its specific use, undertaking all liability implicit in and deriving from use of the product, as well as comply with all methods and instructions for...

Open the catalog to page 2

All Edilteco catalogs and technical brochures

  1. F6-C

    1 Pages

  2. F4-C

    1 Pages

  3. F10

    1 Pages

  4. F8

    1 Pages

  5. F5

    1 Pages

  6. dry-holz

    2 Pages

  7. ISOLSAN

    2 Pages

  8. ISOLTECO

    2 Pages

Archived catalogs

  1. dBRED F3-B

    1 Pages

  2. FONOTECH

    2 Pages