video corpo

dry-holz
2Pages

{{requestButtons}}

Catalog excerpts

dry-holz - 1

Additive for controlled drying stings CHARACTERISTICS DRY-HOLZ is a spܩcial liquid additive, which reduces the water/cement ratio, that has been specially designed to create cernent castings with a low moisture content within 4 weeks from application. Therefore, the castings can be used very quickly for applying wood and linolum floors. DRY-HOLZ greatly reduces the risk of shrinkage and cracking during the setting phase. ADVANTAGES: Reliable time periods for planning and installing wood floors at the site. 镕 Castings are created that quickly eliminate their residual moisture and, once the binder used has matured (28 days for normal cernent), the castings will have a moisture content of less than 2.5% in weight, and therefore are suitable for all types of floors. ͕ Easy to use, DRY-HOLZ does not affect the traditional casting mixing and application methods. Thanks to DRY-HOLZ, the characteristics acquired by the casting improve the heating action of the coils underneath the floor, increasing energy savings and enhancing living comfort. Օ Ecological, because there is no environmental impact. MAIN APPLICATIONS: DRY-HOLZ is an additive that is blended with the cernent casting mix to be used: as a floor foundation for indoor wood and linolթum floors; as a foundation for indoor and outdoor ceramic, terracotta and natural stone floors; Օ above the floor heating Systems (e.g. radiating coil). i.r.l.

Open the catalog to page 1
dry-holz - 2

APPLICATION INSTRUCTIONS Preparing the application surface Remove any dթbris, aust, grease and oil from the surface. No stagnant water and/or upwelling moisture must be prթsent and the substrate must be dry and undamaged; if not, a steam barrier must be applied and then Consolidated. DRY-HOLZ does not affect the mechanical characteristics of the binders; therefore the thickness and dosage are calculated accor-ding to the manufacturթes prescriptions and based on the skill and discrtion of the applicator. Preparing the mix Create the cernent casting mix for floor foundations using the...

Open the catalog to page 2

All Edilteco catalogs and technical brochures

  1. F6-C

    1 Pages

  2. F4-C

    1 Pages

  3. F10

    1 Pages

  4. F8

    1 Pages

  5. F5

    1 Pages

  6. ECAP® L 100

    2 Pages

  7. ISOLSAN

    2 Pages

  8. ISOLTECO

    2 Pages

Archived catalogs

  1. dBRED F3-B

    1 Pages

  2. FONOTECH

    2 Pages