F3

F3

F3

Product catalog summary
Overview: The document provides technical specifications for a range of elastic mats designed for impact sound insulation, produced by Edilteco S.p.A. These mats are part of the dBred Noise Reduction Division and are used under screeds and floating floors to reduce impact noise.
Product Specifications:
  • DBRED F3: Composed of selected SBR rubber bound with polyurethane resins, this mat is 3 mm thick and black in color. It is used under screeds and floating floors, and for membrane protection. It has a specific weight of 780 kg/m3 and a unit weight of 2.34 kg/m2.
  • DBRED F5: Similar in composition to F3, this mat is 5 mm thick. It is recommended for direct gluing of final flooring on the mat. It has a specific weight of 575 kg/m3 and a unit weight of 2.87 kg/m2.
  • DBRED F8: This mat is 8 mm thick and also used for direct gluing applications. It has a specific weight of 575 kg/m3 and a unit weight of 4.60 kg/m2.
  • DBRED F10: The thickest mat at 10 mm, it shares similar applications with F8. It has a specific weight of 575 kg/m3 and a unit weight of 5.75 kg/m2.
Technical Characteristics:
  • All mats have a temperature resistance from -40 °C to +115 °C and are classified as E Class for fire resistance according to DIN EN 13501-1.
  • Dynamic stiffness and tensile strength vary across products, with F3 having the highest tensile strength at 0.40 N/mm2.
  • Thermal conductivity for F5, F8, and F10 is 0.076 W/mK.
Packaging: Each product is packaged in panels with specific dimensions and quantities per pallet, varying by product thickness.
Application and Recommendations: Users are advised to consult the dBred General Catalogue or contact Edilteco's Technical Department for application guidance. The document emphasizes that the provided data are approximate and subject to variation based on environmental conditions and installation practices.
See more

Catalog excerpts

F3-1

Elastic mat for impact sound insulation COMPOSITION All the indications provided in this technical data sheet are purely approximate and not binding for legal purpose. The data listed has been gathered from laboratory tests and it hence follows that in practical applications on building sites the final characteristics of the products may be subject to substantial variations depending on the meteorological conditions and the installation. The user must always check suitability of the product for its specific use, undertaking all liability implicit in and deriving from use of the product, as well as comply with all methods and instructions for use generally referable to “workmanlike” execution. Edilteco S.p.A. reserves the right to change the contents of this mechanical data sheet on its final judgements. The spreading of this data sheet through any media, supersedes and cancels the validity of any other technical data sheet previously published. COMPANY WITH Edilteco S.p.A. Via deil’industria, 710.41038 San Felice sul Panaro (MO) Italy quautysystem Ph. +39 0535 82161 . Fax +39 0535 82970 . www.edilteco.com I [email protected] © Copyright EDILTECO S.p.A. - Non authorized reproduction is forbidden.

 Open the catalog to page 1
F3-2

Elastic mat for impact sound insulation COMPOSITION Selected SBR rubber bound with polyurethane resins (MDI). Under screed, under floating floor bound with dBred felts, protection of membranes. It is also recommended for the application Piano Zero dBred (direct gluing of the final flooring on mat). dBred Noise Reduction Division DS DBRED F5 . Rev 06/2022 . GB COMPANY WITH Edilteco S.p.A. Via deM’Industria, 710.41038 San Felice sul Panaro (MO) Italy quautysystem r 1 ^ ^ J CERTIFIED BY DNV G Ph. +39 0535 82161 . Fax +39 0535 82970 . www.edilteco.com I [email protected] © Copyright EDILTECO S.p.A....

 Open the catalog to page 2
F3-3

Selected SBR rubber bound with polyurethane resins (MDI). Under screed, under floating floor bound with dBred felts, protection of membranes. It is also recommended for the application Piano Zero dBred (direct gluing of the final flooring on mat). All the indications provided in this technical data sheet are purely approximate and not binding for legal purpose. The data listed has been gathered from laboratory tests and it hence follows that in practical applications on building sites the final characteristics of the products may be subject to substantial variations depending on the meteorological...

 Open the catalog to page 3
F3-4

Elastic mat for impact sound insulation Selected SBR rubber bound with polyurethane resins (MDI). Under screed, under floating floor bound with dBred felts, protection of membranes. It is also recommended for the application Piano Zero dBred (direct gluing of the final flooring on mat). All the indications provided in this technical data sheet are purely approximate and not binding for legal purpose. The data listed has been gathered from laboratory tests and it hence follows that in practical applications on building sites the final characteristics of the products may be subject to substantial...

 Open the catalog to page 4

All EDILTECO Group catalogs and technical brochures

  1. General Catalog

    132  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.