Gerbert 2300
5Pages

Catalog excerpts

Data Sheet l*o Ciwip.4n«'il PoV ■ —j, •r Corp.m.-,, i.>l Vinyl-N^k** PART A Gerbert 2300 Premium Two-Part Urethane Flooring Adhesive Gerbert 2300 is a two-part reactive adhesive with low volatile organic compounds (VOCs), designed for indoor and outdoor flooring installations. This adhesive aggressively adheres all types of floor coverings to properly prepared metal and many other difficult-to-bond-to substrates. It is recommended for the installation of homogeneous PVC, solid vinyl tile and planks, rubber sheet flooring, rubber tile (including radial rubber tile), rubber stair treads, vinyl composition tile (VCT), artificial-grass indoor and outdoor carpet, linoleum, mineral fibrous felt-backed sheet goods, carpet, and all types of cork flooring and underlayments. • Excellent for occupied areas (such as hospitals and schools) • Outstanding adhesion in areas with extra heavy traffic and rolling loads (such as wheelchairs and carts) • Excellent for freezer and surface water-spray areas (such as produce departments in grocery stores)

Open the catalog to page 1

DESCRIPTION Gerbert 2300 is a two-part reactive adhesive with low volatile organic compounds (VOC’s), designed for indoor and outdoor flooring installations. This adhesive aggressively adheres all types of floor coverings to properly prepared metal, and many other difficult-to-bond-to substrates. It is recommended for the installation of homogenous PVC, solid vinyl tile and planks, rubber sheet flooring, rubber tile (including radial rubber tile), rubber stair treads, vinyl composition tile (VCT), artificial-grass indoor and outdoor carpet, linoleum, mineral fibrous felt-backed sheet goods,...

Open the catalog to page 2

SUITABLE SUBSTRATES Exterior-grade plywood, Group 1, CC type Other approved wood underlayments (per manufacturer recommendations) Concrete and properly prepared cement terrazzo Cement-based self-leveling underlayments and patching compounds Embossing levelers applied over existing, properly prepared and fully bonded ceramic tile A single layer of properly prepared, fully bonded VCT Properly prepared and primed gypsum underlayments that meet the requirements for compressive strength according to ASTM F2419 Consult Gerbert’s Technical Services Department for installation recommendations...

Open the catalog to page 3

PRODUCT APPLICATION 1. Use a typical notched trowel (see "Product Performance Properties" section) and consult the floorcovering manufacturer’s recommendation regarding the proper trowel to use, ensuring 100% coverage of the flooring material’s backing. 2. Do not spread more adhesive than can be covered with floor covering within 20 minutes. After spreading the adhesive, immediately install the flooring material into the adhesive while it is still fresh. Periodically lift the material to confirm proper adhesive transfer to the backing. Note: The floor temperature directly affects setting...

Open the catalog to page 4

Application Table * Trowel dimensions are depth/width/space. Coverages shown are for estimating purposes only. Actual jobsite coverages may vary according to substrate conditions, type of trowel used and setting practices. STATEMENT OF RESPONSIBILITY Before using, user shall determine the suitability of the product for its intended use and user alone assumes all risks and liability whatsoever in connection therewith. ANY CLAIM SHALL BE DEEMED WAIVED UNLESS MADE IN WRITING TO US WITHIN FIFTEEN (15) DAYS FROM DATE IT WAS, OR REASONABLY SHOULD HAVE BEEN DISCOVERED.

Open the catalog to page 5