*myarchiexpo

E-Grip Evolve

Product catalog summary

Product Overview: E-Grip Evolve is a high-performance adhesive designed for installing Luxury Vinyl Tile (LVT), Luxury Vinyl Plank (LVP), and ECOsilence underlayment. It offers a strong, moisture-resistant bond suitable for commercial applications and is resistant to indentation and plasticizer migration.

Key Features:

Strong tenacious bond for ECOsilence under LVT.
Resistant to indentation and plasticizer migration.
Low VOC formula compliant with SCAQMD Rule 1168.
Easy application with no mixing required.
CRI Green Label Plus Certified.

Limitations:

Not suitable for substrates containing asbestos.
For interior use only.
Do not apply over existing adhesive residue.
Use only when substrate temperature is between 65°F and 90°F (16°C and 32°C).
Protect from freezing.

Application Characteristics:

Adhesive Type: Vinyl Acrylic Polymer.
Color: Off-White.
Antimicrobial properties.
Freeze/Thaw stability up to 5 cycles at 0˚F (-18˚C).
Consistency: Creamy.
PH: 7-9.
VOC Content: 0.28 lbs/gal (34 g/l).
Shelf Life: 2 years at 73˚F (23˚C).

Suitable Substrates: Includes exterior grade plywood, concrete, cement terrazzo, and properly prepared gypsum underlayments. Follow flooring manufacturers' guidelines for complete substrate suitability.

Surface Preparation: Substrates must be clean, dry, and free of contaminants. Follow ASTM F-710 standards for surface preparation.

Cleaning: Clean adhesive from surfaces with water while wet. Use mineral spirits for dried adhesive, but avoid direct application on flooring materials.

Warranty: 5 years.

Coverage Rates:

For 5mm ECOsilence: 100 to 125 sq.ft./U.S. gal.
For 2mm ECOsilence: 150 to 200 sq.ft./U.S. gal.

Health and Safety: Rated 1 for health, 0 for flammability, reactivity, and personal protection.

Catalog excerpts

Data Sheet E-Grip Evolve Premium High Performance Adhesive for ECOsilence Underlayment, Sheet Vinyl, LuxuryVinyl Tile & Plank E-Grip Evolve is a proprietary, high performance, wet-set adhesive designed specifically for installing Luxury Vinyl Tile and Plank and ECOsilence under- layment membranes. With its strong, durable, moisture-resistant and alkali-resistant bond, it is ideal for commercial applications. E-Grip Evolve has an excellent open time, develops strength quickly, performs well under rolling loads and resists indentation. Its low volatile organic content makes it ideal for use in occupied buildings. Advantages • Strong tenatious bond when installing ECOsilence under LVT • Do not install over substrates containing asbestos • Transitional, hard setting resistant to indentation • For interior installations only • Plasticizer migration resistant for use with approved LVT, LVP and vinyl flooring • Do not apply over existing adhesive residue • Low VOC formula meets SCAQMD (South Coast Air Quality Management District Rule 1168) • Easy to trowel and easy clean up • No mixing required • CRI Green Label Plus Certified • Use only when substrate temperature is between 65°F and 90°F (16°C and 32°C) • Protect from freezing Follow flooring manufacturer’s instructions for installatio

Open the catalog to page 1

E-Grip Evolve *Flash Time: The amount of time recommended for the adhesive to remain exposed to the air and still effectively bond to the floor covering. **Working Time: The maximum amount of time that an adhesive can remain exposed to the air and still effectively bond to the floor covering. NOTE: Flash and working times may vary based on temperature, humidity, substrate porosity, trowel size and jobsite conditions. © 2018 Ecore International www.ecoreintl.com

Open the catalog to page 2

E-Grip Evolve Coverage Rates* Flooring Type * Coverage shown is for estimating purposes only. Actual jobsite coverage may vary according to substrate conditions and setting practices.

Open the catalog to page 3

E-Grip Evolve

E-Grip Evolve

Catalog excerpts

All ECOsurfaces Recycled Rubber Flooring catalogs and technical brochures

Archived catalogs