EcofloorTM Installation Guide
3Pages

Ecofloor™ Installation Guide Ecofloor provides thermal insulation and added sound control by reducing reverberant noise when applied to the under-floor of residential and commercial buildings. Ecofloor — Customer support For additional information on Ecofleece insulation installation, call toll free 0800 400 326 Store Ecofloor insulation: Under cover Protect from moisture dirt and dust if opened Ecofloor - Safety When working with Ecofloor insulation protective clothing and equipment is not essential but is recommended, particularly in retrofit installations. Protective glasses are required. Ecofloor — Before installation check Areas where Ecofloor insulation is to be fitted are clean and free of dust and wood chips - a group vapour barrier may be required. Framing has a moisture content of 20% or less. Exterior cladding is weather tight. All electric wiring has been marked with electric hazard stickers. The Ecofleece insulation is as specified.

Ecof loor - Tools The following tools required to install Ecofloor insulation: Tape measure. Craft knife. Light weight overalls / protective clothing. Electrical hazard stickers. Safety glasses. Ecofloor — Opening the pack Split the plastic wrapping lengthwise- and will expand on being released. Ecofloor insulation is compressed during packing Ecofloor - Cutting to size The best way to cut Ecofloor insulation lengthways is to use a strong craft knife or Tajima knife. On site, cutting should be kept to a minimum. Avoid cutting sheets of Ecofloor against the joists or bearess. Change the...

Ecofloor - Wiring Head Office Triton Plaza North Shore Auckland Showroom 7 Beatrice Tinsley Crescent North Shore Where possible Ecofloor should be fitted above the electrical wiring lines. Warning stickers are recommended at points where Ecofloor will cover the electrical wiring. Take care not to crush or damage power or phone lines. Don't use staples or mechanically fix Ecofloor. Remove all the unused materials and off-cuts from the site and leave the work area clean Leave a label fixed to the inside of the access door. Once fully completed an installation certificate will be issues....