
APPLE SERIE GROUP OF CHESTFREEZER USER GUIDE NEGATIVE CHESTFREEZER APPLE 150 APPLE HEAD POSITIVE CHESTFREEZER AAPPLE 150 APPLE HEAD
Open the catalog to page 1GENERAL INFORMATION GENERAL APPEARANCE OF COOLER ATTENTION BEFORE CALLING THE SERVICE CONTACT NUMBER
Open the catalog to page 2This chestfreezer which has successfully passed from quality control tests, has been produced in the plant of Ecocold A.S. with a big passion. To increase efficiency of your cooler, before using it we strongly recommend you; to read the whole guide keep the guide as a source to use the cooler according to guide instructions. We want to remind that, we will be not responsible for the damages that depends on the incorrect usage or instruction disobedience. For damage and information issues, please contact to nearest customer service center. The product will also be out of warranty, if someone other...
Open the catalog to page 3The operating temperature range of the chestfreezer is between -1 and +4 degrees. The operating temperature range of the cooler is between -18/-23 degrees. The product does not contain Asbestos, formaldehyde, cadmium and CFC materials Compressor oil is based on none PCB and PCT. The refrigerant gas is R404a, or R290a, which is is proper for KYOTO protocol. This device is also proper for WEEE (Waste Electric and Electronic Equipment) regulations THIS PRODUCT Is respectful to environment and has been produced in modern plants. TECHNICAL FEATURES OF COOLER TECHNICAL FEATURES APPLE HEAD Internal...
Open the catalog to page 4GENERAL APPEARANCE APPLE HEAD
Open the catalog to page 5GENERAL APPEARANCE PROTECTIVE BUMBERS DIGITAL THERMOSTAT COMPRESSOR AIR GLIDE
Open the catalog to page 6Check the socket, whether it is suitable or not. A grounded socket is must. Make sure your structure wiring. Do not use sockets that are not fixed. Extension cable and multiple sockets are not advised. If it is an obligation, beware of voltage and cable diameter. If the cable is damaged, the replacement must be done by authorized Ecocold service. While running, if you have a hesitation concerning electrical connection, call the nearest service. When unplugging, hold the knob of the socket, never hang from cable. External covers must not be removed. Otherwise, dangerous parts and sections will...
Open the catalog to page 7If possible, carry the cooler with a forklift or a hand lift If you have a no lift, carry the cooler with enough person in a stable position. While carrying the cooler, just handle from wooden pallet. Never use front or back protection wires. While carrying the cooler always use gloves.
Open the catalog to page 8Remove the plastic clamps to release the cabinet from the transport pallet. Cut off the protection nylon on the cabinet by using a cutting tool. Remove the cardboard package and the styrofoam conserves on the cabinet. Remove the cabinet that is fixed to the pallet from the fixing areas with screwing tools. Unfix the fixed screws and move the cabinet on to the floor from the pallet with the help of 4 people.
Open the catalog to page 9Make a stable pushing.Between cooler and wall, there must be min 15 cm gap. After allocated the cooler, you should wait for 6 hours. Than you can plug it, the first run must be when the cooler is empty for 2 hours.
Open the catalog to page 10By using adjustable feet, make the cooler stable. Avoid gaps, prevent vibration. Compressor group air inlet must not be prevented. This is the most important issue. Allocate your product that it will be parallel to the ground, no aim is required. Adjustable feet and rollers must touch the base. The distance between compressor group and wall is important. More distance, provides increasing performance. For that reason, at least 15 cm gap is required. After transport of the cooler, before operating it, you should wait for three hours. The first running must be done when the cooler is empty. Loading...
Open the catalog to page 11Temperature of the cooler is calibrated for the most proper conditions. The operating temperature can be adjusted from the digital thermostat. We advice you to keep them with default factory value. Internal temperature of the cooler is -18/ -23 degrees, can be adjusted 01 – 04 degrees. Digital thermostats have default factory values, and no need adjustment. Thermostats may have many programs within (eco mode) If you have a problem with your cooler, please contact to service. Failure codes are listed in failure section. If you get any of these, stop the alarm of the thermostat and inform the service....
Open the catalog to page 12POSSIBLE SOLUTION CHECK THE PLUG AND FUSE. THE PROBLE CAN BE AT ELECTRICAL CABLE OR PLUG.. THERE IS SNOWING OR SWEATING IN THE CABINET MAKE SURE THE SLIDING LIDS ARE FULL CLOSED. MAKE SURE THAT THERE IS NO AIR IN THE FREEZER. EXTERNAL HUMIDITY MAY BE INCREASED OR THERE IS AIR IN THE FREEZER. PLEASE CONTROL THE SLIDING LIDS. TEMPRATURE IS HIGH BUT IT IS NOT COOLING CONTROL THE ADJUSTMENT OF THE THERMOSTAT. MAKE SURE THAT AIR PANELS ARE NOT BE CLOSED. INTERNAL CLEANING Remove beverages. Wait for the internal temperature that it will be same with environment temperature. For cleaning and maintenance...
Open the catalog to page 13www.ecocold.com.tr CONTACT Ekrem Elginkan Caddesi No 5 Manisa OSB 3. Kısım Yunusemre, Manisa - TURKEY +90 236 213 09 77 [email protected]
Open the catalog to page 141 Page
1 Page
1 Page
1 Page
1 Page
1 Page
1 Page
1 Page
1 Page
1 Page
1 Page
1 Page
1 Page
1 Page
1 Page
1 Page
1 Page
1 Page
1 Page