ECO-118
12Pages

ECO-118 Surface solar beacons E c o - In n o v 523 rue de la Béalière - 38360 Noyarey - France Tel: +33 438 70 00 27 - Fax: +33 438 49 21 36 info@eco-innov.com - www.eco-innov.com Photos not contractually binding. Eco-Innov reserves the right to modify the technical characteristics of its products without notice.

Surface solar beacons / ECO-118 Presentation Surface solar beacon Fully self-contained luminous beaconing solution. Used to mark the edges of roundabouts, traffic islands, obstacles, pavements, etc. Very simple and quick to install by glueing and screwing on to the support. Numerous options (LED colours, beaconing mode). E c o - In n o v 523 rue de la Béalière - 38360 Noyarey - France Tel: +33 438 70 00 27 - Fax: +33 438 49 21 36 info@eco-innov.com - www.eco-innov.com Photos not contractually binding. Eco-Innov reserves the right to modify the technical characteristics of its products...

INNOV' Surface solar beacons / ECO-118 TECHNICAL CHARACTERISTICS Dimensions and weight 118 mm x 118 mm x 20 mm Height above roadway: 20 mm. Weight: approximately 500 g. Materials Polycarbonate / Aluminium / Reflector equipped with glass beads Recycling managed by Recyclum* Energy storage Ni-MH accumulator. Lifespan and guarantee Average lifespan more than 5 years. 2-year guarantee** Working temperature range -30°C to +85°C Protection indices IP 68 (watertightness). IK 10 (impact resistance). Not suitable for roadway use. LIGHTING CHARACTERISTICS • Unidirectional 2 or 4 LEDs, or...

Surface solar beacons / ECO-118 usage. It covers replacement of the faulty article with an identical model delivered free of charge to destinations in metropolitan France, after the faulty article has been returned and analysed. Removal of the faulty article, installation of the new one and any mechanical damage are not covered by the guarantee. E c o - In n o v 523 rue de la Béalière - 38360 Noyarey - France Tel: +33 438 70 00 27 - Fax: +33 438 49 21 36 info@eco-innov.com - www.eco-innov.com Photos not contractually binding. Eco-Innov reserves the right to modify the technical...

Surface solar beacons / ECO-118 Installation 1 - After deciding where the stud and screws are to be installed, drill the support (Ø 11 mm, depth 33 mm), making sure to leave a distance of 106 mm between the centres of the 2 screws. 2 - Carefully brush and clean the holes, support and lower part of the stud with a degreasing agent (Sika Aktivator 205 or equivalent) to remove all traces of dust and moisture. Then hammer the lower part of the attachment screws into the holes. E c o - In n o v 523 rue de la Béalière - 38360 Noyarey - France Tel: +33 438 70 00 27 - Fax: +33 438 49 21 36...

Surface solar beacons / ECO-118 3 - Remove the magnet under the stud and check that the LEDs are working properly by completely masking the solar module (to simulate night-time conditions). Apply about 3 mm of two-component epoxy adhesive (Sikadur 30 or equivalent) to the entire lower surface of the stud. Position the stud on the support, making sure the LEDs are facing the right way. Screw the upper part of the screws into their base using the wrench supplied. 4 - Leave the adhesive to set (see the manufacturer's instructions for the necessary time). The entire lower surface of the stud...

ECO-250 Surface solar beacons E c o - In n o v 523 rue de la Béalière - 38360 Noyarey - France Tel: +33 438 70 00 27 - Fax: +33 438 49 21 36 info@eco-innov.com - www.eco-innov.com Photos not contractually binding. Eco-Innov reserves the right to modify the technical characteristics of its products without notice.

Surface solar beacons / ECO-250 Presentation Luminous solar studs for traffic islands Fully self-contained luminous beaconing solution. Used to mark the edges of roundabouts, traffic islands, chicanes, central reservations, etc. Very simple and quick to install by glueing and screwing on to the support. Omnidirectional (360°) flashing beacon. E c o - In n o v 523 rue de la Béalière - 38360 Noyarey - France Tel: +33 438 70 00 27 - Fax: +33 438 49 21 36 info@eco-innov.com - www.eco-innov.com Photos not contractually binding. Eco-Innov reserves the right to modify the technical characteristics of...

INNOV' Surface solar beacons / ECO-250 TECHNICAL CHARACTERISTICS Dimensions and weight Diameter: 250 mm. Height above roadway: 50 mm. Weight: approx. 1.8 kg. Non-skid treatment on the upper flange. Materials Polycarbonate / Aluminium Recycling managed by Recylum* Energy storage Condenser. Lifespan and guarantee Average lifespan more than 10 years. 2-year guarantee** Working temperature range -30°C to +85°C. Protection indices IP 68 (watertightness). IK 10+ 100 Joules (impact resistance). Pressure resistance Edge stud for non-traversable lanes. LIGHTING CHARACTERISTICS • Flashing...

Surface solar beacons / ECO-250 * In the framework of our commitments as a producer of professional WEEE (see section on recycling Recyclage). ** The guarantee applies in the event of complete failure of the self-contained lighting system during normal usage. It covers replacement of the faulty article with an identical model delivered free of charge to destinations in metropolitan France, after the faulty article has been returned and analysed. Removal of the faulty article, installation of the new one and any mechanical damage are not covered by the guarantee. E c o - In n o v 523 rue de...

Surface solar beacons / ECO-250 Installation 1 - After deciding where the stud and 4 screws are to be installed, drill the support (Ø 11 mm, depth 33 mm), making sure to leave a distance of 169 mm between the centres of the 2 screws. 2 - Carefully brush and clean the holes, support and lower part of the stud with a degreasing agent (Sika Aktivator 205 or equivalent) to remove all traces of dust and moisture. Then hammer the lower part of the attachment screws into the holes. 3 - Apply about 3 mm of two-component epoxy adhesive (Sikadur 30 or equivalent) to the entire lower surface of the...