E3DC TD SE series

Product catalog summary

Overview: This document provides technical specifications for the SE series home power stations by Hager Group, focusing on the hybrid power inverter SE, which can operate with or without a battery system.

Specifications:

Input: Max DC rated power is 12,500 Wp PV, with a start input voltage of 180 V and a max DC input voltage of 1,000 V. It supports two independent MPP trackers and is compatible with module optimizers.
Output: Max AC rated power is 8,000 VA at 230 V, 50 Hz. The system is transformerless with a cos(phi) range of -0.9 to +0.9.
General Data: System efficiency is over 92%, with EU efficiency of the PV power inverter over 97%. It includes earth-fault monitoring and is approved according to several standards including VDE and CE.
Environmental Conditions: Operates in temperatures from 0 to +35°C for the inverter and +5 to +35°C for the battery system, with a max relative humidity of 85%.
Storage: Usable battery capacity is 8.25 kWh, with a lithium-ion battery technology. The system allows for battery extension up to one year after installation.

Operating Modes: The system supports DC operation, AC storage, and hybrid (DC + AC) modes.

System and Options: Features include freely selectable feed-in, overvoltage protection, and communication interfaces like ModBUS(TCP) and RSCP. It supports home automation systems such as Loxone and KNX.

Additional Information: The hybrid power inverter can function as a standalone inverter or as part of an energy farming setup. Internet connection is required for remote maintenance.

Catalog excerpts

HYBRID POWER INVERTER SE (ALSO AVAILABLE WITHOUT A BATTERY SYSTEM) Technical data Home power stations of the SE series Standalone hybrid A member of Hager Group

Open the catalog to page 1

Input Max. recommended DC rated power (Wp PV) Start input voltage (V) Min. MPP voltage (V) Max. MPP voltage (V) Max. DC input voltage (V) Max. DC current per MPP tracker (A) 11 Max. PV short-circuit current (A) Independent MPP trackers (PV) Input connection technology Compatibility with module optimisers AC storage system - max. input power (W) _12,500_ 180 85 850 1,000 13 15.6 2 3 Sunclix pairs (2 x PV and 1 x battery) Yes All E3/DC home power stations are hybrid storage systems 2) 3) Output Max. AC rated power (230 V, 50 Hz) (VA)_8,000 3) Max. output current (per phase) (A) 11.6 Feed-in phases...

Open the catalog to page 2

Technical data S10 SE Storage S10 SE Usable battery capacity (kWh) Rated power, charging / discharge (kW) Spatially separable battery system (cable length up to 10 m) Battery technology Weight of batteries (kg/kWh) E3/DC temperature regulation Battery extension or battery retrofitting up to 1 year after installation to kWh (usable) 7) Battery capacity warranty 8) 10 years on 80 % of the usable battery capacity Ready for future System and options Feed-in 9 Freely selectable between 0 % (non-EEG operation) and 100 % Overvoltage protection To be set externally by an installation technician Communication...

Open the catalog to page 3

HagerEnergy GmbH Ursula-Flick-Strasse 8 D-49076 Osnabruck SOLAR £ PRO i SUMER < 3 + Wallbox + Inverter + HEMS Status: 19 February 2024. The current PDF document at e3dc.com/en/infocentre/#Downloads is always binding. Subject to modifications and errors.

Open the catalog to page 4

E3DC TD SE series

E3DC TD SE series

Catalog excerpts

All E3 DC catalogs and technical brochures