Dynamo PLAY GROUND PRODUCT SPECIFICATION Product Name Product Number Size -- Width Size -- Height Shipping Weight Shipping Volume Foundations Concrete Volume *Note: Concrete must be minimum 3500 PSI / 25MPa Product Features: SUPPORT POSTS: This will be 5 9/16" (141.3mm) OD Schedule 40 steel pipe. SWIVEL CONNECTOR: This will be an aluminum swivel connector with a low friction and high abrasion resistant UHMWPE bushing and tamper-resistant attachments. The aluminum swivel will have a smooth machine finish. SUSPENSION CHAIN: This will be either 5/16" (8 mm) galvanized steel chain. Each chain will have independent connections at seat and pivot. SEAT CONNECTION: The seat will be connected to the chain at four points, each by a one-piece machined stainless steel sleeve. (Patent Pending) SEAT BUMPER: This will be 3 1/2" (90mm) OD textile reinforced high-pressure rubber hose, containing no external dye markings and covered with a wear and soil resistant surface. BIGGO™ SEAT: This will be a one-piece aluminum bowl, weighing with its bumper and pieces no more than 42 lbs (19 kg) empty. BASIC FASTENERS: All fasteners for component attachments are stainless steel. PAINT PROCESS: All exposed steel will be finished with polyester powder coating unless otherwise specified. Prior to the powder coating application, the surface will undergo sand blasting and will be treated with a zinc rich epoxy primer having a minimum thickness of 1.5 mils. Plantagenet, ON K0B 1L0 Canada W: www.dynamoplaygrounds.com

PRODUCT SPECIFICATION INSTALLATION: This should be installed only by a licensed playground installer, trained and certified on the relevant playground standards in place in the region of installation, e.g., NPSI, CPSI or similar certified. NO-ENCROACHMENT ZONE: Where required, this will be an obstacle-free zone that does not necessarily meet the requirements of the protective surfacing zone. See applicable standard for more information. COMPLIANT WITH: CAN/CSA-Z614 ASTM F-1487 EN-1176 CPSC Handbook for Public Playground Safety IPEMA CERTIFIED: The DX-3175 identified in this specification sheet...