SUPER FLEX POWDER
3Pages

Technical Datasheet SUPER FLEX POWDER Flexible fiber-reinforced cementitious sealant for cracks from 1-15mm PROPERTIES Innovative, vinyl based sealant in powder form, fortified with glass spheres. It offers long-term protection and it is water repellent. it remains unaffected by frost or permanent moisture, even standing water, combining its excellent sealing and waterproofing action. Can be painted in 96 indelible shades with DUROCOLOR POWDERC in a ratio of 3% by weight, or painted with emulsion and acrylic paints. Classified PCC R2 as product for non-structural repair of concrete per EN 1504-3 ADVANTAGES • Ready to use, simply by adding water. • Practical packaging, easy to work with. • It has excellent adhesion on concrete and plaster. • Flexible, thixotropic. • It dries quickly, it can be drilled and screwed. • Fills holes, cracks, joints. • Its application does not leave a patch. APPLICATIONS DUROSTICK SUPER FLEX POWDER is suitable for a variety of applications for both professional and amateur use. Seals, without shrinking or peeling, any joint or crack in plaster (pic.1), concrete (pic.2), stone, joints in tiles, marble, glass bricks, roof tiles, decorative bricks, etc. Suitable for interior and exterior applications. Effective for the repair of small cracks, created between dissimilar materials such as plaster and concrete with stone or ceramics. It also repairs ceiling surfaces without sagging. Seal existing, and worn out decorative brick joints as well as natural stone joints (stone houses and walls) effectively. Make the application easier by using DUROSEAL 600, Professional Cartridge and ‘Sausage’ Barrel Gun, or DUROSTICK BLANK CARTRIDGE. USE 1. Surface preparation Surfaces must be clean, free from loose materials, dust and grease. Soak the surface before the application of the product. The technical specifications and directions of use contained in this technical brochure are the results of the knowledge and experience of the company's research and development department, as well as from the real-life applications of the product. The recommendations and suggestions regarding the use of the products are made without guarantee since the respective conditions during their application are beyond the control of the company. For this reason, it is the user's responsibility to make sure that the product is suitable for the intended application as well as the application conditions

Technical Datasheet SUPER FLEX POWDER Flexible fiber-reinforced cementitious sealant for cracks from 1-15mm 2. Application In a clean container with cool water add SUPER FLEX POWDER, at a ratio of 250gr mortar to 75ml water, and mix with a putty knife. Use a lowrpm drill when mixing the entire 5kg bag with 1.6lt of cool water, until a lump free homogeneous thick paste is created that is suitable for use. Apply the product using a wetted flexible taping knife and press the product into the void, until it is filled. Smooth out any imperfections with a small putty knife or the application...

Technical Datasheet SUPER FLEX POWDER Flexible fiber-reinforced cementitious sealant for cracks from 1-15mm The technical specifications and directions of use contained in this technical brochure are the results of the knowledge and experience of the company's research and development department, as well as from the real-life applications of the product. The recommendations and suggestions regarding the use of the products are made without guarantee since the respective conditions during their application are beyond the control of the company. For this reason, it is the user's...