QUARTZ DECO PU
3Pages

TECHNICAL DATA SHEET QUARTZ DECO PU Binding polyurethane resin for stone carpets High quality, two-component polyurethane-based resin. Suitable as a binder, when added to the quartz aggregates QUARTZ DECO. Once cured, it creates a finish product with solid mass that is flexible.  • Powerful adhesion to sound substrates. • Exceptional workability and ease of application. • Very good resistance to mechanical and chemical wear. • Resistant to UV radiation. • Highly durable against abrasion. • Highly durable to exterior applications and temperature variations. • Yields a slip-resistant finish surface. • Easily cleaned with standard household cleaners, without being affected by them. The mixture of the resin QUARTZ DECO PU with the QUARTZ DECO aggregates in grain sizes of 0.1-8mm, is ideal for the creation of slip resistant stone carpets with an exceptional aesthetic value, that can also withstand any abrasion created by foot and vehicle traffic. The mixture of the resin QUARTZ DECO PU with the QUARTZ DECO aggregates in grain sizes of up to 2mm, can also be applied to walls and stairs, provided that the surfaces are coated (primed) with the two-component paste EPOXY PUTTY. Use it in new construction, but also in renovation projects, as well as any residential and commercial spaces alike. The technical specifications and directions of use contained in this technical brochure are the results of the knowledge and experience of the company's research and development department, as well as from the real-life applications of the product. The recommendations and suggestions regarding the use of the products are made without guarantee since the respective conditions during their application are beyond the control of the company. For this reason, it is the user's responsibility to make sure that the product is suitable for the intended application as well as the application conditi

TECHNICAL DATA SHEET QUARTZ DECO PU Binding polyurethane resin for stone carpets 1. Surface preparation The careful preparation of the substrate is crucial for achieving the exceptional final results polyurethane systems are capable of yielding. All application surfaces must be flat, sound, free from loose materials, dust, grease, oils, and they also must be completely dry. The moisture content of the substrate should not exceed 5% and the relative humidity in the application area should be less than 65%. The application of the mixture should be done only on properly prepared surfaces. If...

TECHNICAL DATA SHEET QUARTZ DECO PU Binding polyurethane resin for stone carpets • DUROSTICK also has available for purchase a 32lt mixing container, as well as specialty stainless steel trowels, suitable for these types of applications. • When mixing the binding resin with QUARTZ DECO aggregates, with grain sizes less than 2mm, it is recommended to wear protective clothing, gloves, and safety goggles. • The application by a professional is highly recommended. TECHNICAL SPECIFICATIONS n Chemical base Two-component aliphatic polyurethane Clean all tools with THINNER 201 of DUROSTICK,...