TECHNICAL DATASHEET MS-POLYMER MARINE Flexible sealant suitable for wood decks in shipbuilding Flexible adhesive sealant with proven resistance to sea water and UV radiation. The hybrid technology of the polymer modified, silane-based MS-Polymer sealant covers a multitude of application needs for waterproofing as well as sealing. Key features include high mechanical strengths, and unbreakable bonding. It is unaffected from prolonged sun and salts exposure. On curing, the product can be sanded, and it does not discolor.  MS-POLYMER MARINE is suitable for sealing joints on the wood decks of yachts and ships. It is recommended for sealing wood floor joints in houses, both indoor and out, especially in saunas, swimming pools, fitness centers etc.  • High resistance to sea water • Solvent free product • Resistant to temperature variations from -40°C to +120°C • Applications on stable surfaces do not require any priming • A high thixotropy material; it does not sag.  1. Surface preparation The edges of the joints must be dry, clean and free from dust, grease and loose materials. The minimum width of the joint must be no less than 5mm. For joints greater than 12mm, the joint depth should be half its width. For joints less than 12mm, the joint depth should be equal to its width. 2. Application It is highly recommended to apply MS-POLYMER MARINE, in cartridge form, using the DUROSTICK PROFESSIONAL CARTRIDGE GUN, or use its ‘sausage’ form, together with the DUROSTICK DUROSEAL 600, the Professional Cartridge and ‘Sausage’ Barrel Gun. The technical specifications and directions of use contained in this technical brochure are the results of the knowledge and experience of the company's research and development department, as well as from the real-life applications of the product. The recommendations and suggestions regarding the use of the products are made without guarantee since the respective conditions during their application are beyond the control of the company. For this reason, it is the user's responsibility to make sure that the product is suitable for the intended application as well as the application c

TECHNICAL DATASHEET MS-POLYMER MARINE Flexible sealant suitable for wood decks in shipbuilding Cut the nozzle on a slant and fill the joint tilting the cartridge at a 45° angle in relation to the joint, making sure that air is not trapped under the sealant. Remove the excess material with a flexible putty knife. Shape and finish the material before any (surface) skin formation.  Clean the still fresh product, using DUROSTICK THINNER 101. When the product cures, it becomes hard to clean and it can be removed only by mechanical means.  Indicatively a cartridge will cover TECHNICAL SPECIFICATIONS...