DuPont™ LiquidArmor™ RS Flashing and Sealant
4Pages

Product Information Sheet DuPont™ LiquidArmor™ RS Flashing and Sealant Liquid Flashing Solution for Residential Applications FEATURES/BENEFITS Description DuPont™ LiquidArmor™ RS Flashing and Sealant is a sprayable, waterborne coating to be used around the rough openings of windows and doors and over window flanges on residential homes that delivers better performance, higher reliability, easier application and lower installation cost than incumbent products (i.e., butyl flashing tapes or plastic sill pans). LiquidArmor™ RS dries to form a tight, seamless barrier around the window. It self-seals around nails, forming a tight, seamless barrier against water and air leakage. If an airless paint sprayer is not available, the coating can be brushed or rolled, etc. The sprayable formulation is also engineered to penetrate and seal hard-to-reach gaps. LiquidArmor™ RS offers exceptional adhesion to oriented strand board (OSB), plywood, extruded polystyrene (XPS), housewrap, Great Stuff Pro™ Window & Door Polyurethane Foam Sealant,* and acrylic caulk, among other substrates. Once cured, it is extremely durable, withstanding jobsite conditions and weathering when applied around the rough opening of a window or over the top of the nail flange of windows. Ease of Use LiquidArmor™ RS Flashing and Sealant is easy to handle and apply. Some benefits include: • Application range: 35º–120º F • One step (no mesh required) • Tolerates freeze-thaw • Tolerates heat-age • Rain-resistant • Extremely durable Available Sizes LiquidArmor™ RS Flashing and Sealant is available in 5-gallon pails at select locations. PROPERTIES DuPont™ LiquidArmor™ RS Flashing and Sealant exhibits typical properties and characteristics indicated in Table 1 when tested as represented. Please contact DuPont at 1-866-583-2583 when additional guidance is required for writing specifications that include this product. TABLE 1: Typical Properties for LiquidArmor™ RS Flashing and Sealant Appearance FViscosity (cps/mPa*s) (@ 127°C, no.28 Spindle, 10 rpm)

INSTALLATION Use Conditions • Surface and ambient temperatures should be 35°F and rising and below 120°F during application. DuPont™ LiquidArmor™ RS Flashing and Sealant tolerates rain shortly after installation. However, do not apply to surfaces with standing water or frost. • Use safety glasses with side shields. • Cover exposed skin and wear gloves while using a sprayer. • Ensure adequate ventilation during spray applications. • Follow all spray equipment instructions and warnings. • As with any construction site, follow basic safety practices. Preparation • To facilitate best results,...

Warranties available as described at building.dupont.com/ warranties. WARNING: For Professional Use Only – Read and follow the entire Handling section and the Safety Data Sheets (SDSs, formerly MSDSs or Material Safety Data Sheets) carefully before use. The information below is designed to protect the user and allow for safe use and handling of DuPont products. Follow all applicable federal, state, local and employer regulations. THESE WARRANTIES ARE IN LIEU OF ALL OTHER GUARANTEES AND WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR...

For more information visit building.dupont.com or call 1-866-583-2583 NOTICE: No freedom from any patent owned by DuPont or others is to be inferred. Because use conditions and applicable laws may differ from one location to another and may change with time, Customer is responsible for determining whether products and the information in this document are appropriate for Customer’s use and for ensuring that Customer’s workplace and disposal practices are in compliance with applicable laws and other government enactments. The product shown in this literature may not be available for sale...