PRODUCT DESCRIPTION & USE Armstead Trade Contract Matt is a professional quality, high opacity, quick drying matt emulsion for both old and new surface areas. Suitable for all normal interior wall and ceiling surfaces. PRACTICAL COVERAGE up to 15M2/L 9M2/L 16-24h 6-16h WHITE WATER SPIRIT Sealing new/bare surfaces: Add up to 1 part clean water to 5 parts paint. Normal use (not to be exceeded): Thinning is not required. Conventional spray application: Add up to 1 part clean water to 5 parts paint. Airless spray application: Thinning is not required. PACK SIZES SPRAY RECOMMENDATIONS (Not all colours available in both pack sizes) COLOUR RANGE Armstead Trade Exclusive: BS4800: RAL: NCS 1 & 2: 64 colours 35 colours 6 colours 64 colours Visit www.armsteadtrade.co.uk/pp FILM PROPERTIES Conventional Spray: Satisfactory through most equipment. Airless Spray: A typical recommendation for airless spray application is a minimum working pressure on paint of 140 kg/cm2 (2000 Ib/sq in) with a spray tip size of 0.38mm (15 thou) spray tip Angle 65°. DRYING TIMES (SINGLE COAT, STANDARD THICKNESS) up to 15M2/L 9M2/L 16-24h 6-16h 2-4h WHITE WATER SPIRIT Chemical Resistance: Not suitable. Heat Resistance: Not suitable for use on heated surfaces e.g. radiators. Water Resistance: Will tolerate the levels of atmospheric humidity present in normal interior environments. COMPOSITION (NOMINAL) Pigment: Binder: Solvent: A guide to the practical coverage which can be achieved under normal conditions is up to 15m2/litre. Excellent coverage Quick drying Ideal for new plaster Lightfast Pigments. Acrylic Copolymer Emulsion. Water. VOLUME SOLIDS *Dependent upon temperature and humidity. After use, remove as much paint as possible from equipment before cleaning with clean water. TRANSPORTATION & STORAGE Do not use or store in extremes of temperature and protect from frost. To prevent spillage, please store and transport upright. SURFACE PREPARATION Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease and salts. New plaster and masonry must be fully dry before priming. APPLICATION Brush, roller, spray & airless spray. As with other water-based paints, do not apply in temperatures below 8ºC (as recommended by British Standard BS 6150) SYSTEM INFORMATION Stir thoroughly before use. On very absorbent surfaces apply a sealing coat of thinned Armstead Trade Contract Matt. Finishing: Apply 1 or 2 coats of Armstead Trade Contract Matt. Note: Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead. EU limit value for this product (cat A/a) : 30g/l (2010).This product contains max. 2.9g/l VOC VOC Content Minimal 0 – 0.29%. VOCs (Volatile Organic Compounds) contribute to atmospheric pollution. FURTHER SUPPORT Online: www.armsteadtrade.co.uk Email: [email protected] Phone: 08444-817-818 Please visit www.armsteadtrade.co.uk to download safety sheet SDSAM201 Like us on Facebook Follow us on Twitter Let’s create together a better future for our planet. Find out how at: www.armsteadtrade.co.uk/pp AkzoNobel, the AkzoNobel logo, Armstead, and Planet Possible are trademarks of the AkzoNobel