PRODUCT DESCRIPTION & USE Armstead Trade Vinyl Silk is a professional quality, washable midsheen emulsion that resists scung and abrasion. Suitable for all normal interior wall and ceiling surfaces. Tough, wipeable finish Good opacity & coverage For interior walls & ceilings A guide to the practical coverage which can be achieved under normal conditions is up to 14m2/litre. WHITE WATER SPIRIT THINNING Sealing new/bare surfaces: Normal use: Conventional spray application: PACK SIZES Airless spray application: Add up to 1 part clean water to 20 parts paint. Thinning is not required. Add up to 1 part clean water to 4 parts paint. Thinning is not required COLOUR RANGE Armstead Trade Exclusive: BS4800: RAL: NCS 1 & 2: 150 colours 100 colours 45 colours 3488 colours Visit www.armsteadtrade.co.uk/pp FILM PROPERTIES Chemical Resistance: Not suitable. Heat Resistance: Not suitable for use on heated surfaces e.g. radiators. Water Resistance: Will tolerate the levels of atmospheric humidity present in normal interior environments. COMPOSITION (NOMINAL) Pigment: Binder: Solvent: Lightfast Pigments. PVA Copolymer. Water. VOLUME SOLIDS 32% (nominal) for Brilliant White, colours will vary. SURFACE PREPARATION Conventional Spray: Satisfactory through most equipment. Airless Spray: A typical recommendation for airless spray application is a minimum working pressure on paint of 140 kg/cm2 (2000 Ib/sq in) with a spray tip size 0.38mm (15 thou) and a spray tip angle 65° DRYING TIMES (SINGLE COAT, STANDARD THICKNESS) up to 14M /L 15M2/L 9M2 16-24h 6-16h 2-4h WHITE WATER SPIRIT *Dependent upon temperature & humidity. After use, remove as much paint as possible from equipment before cleaning with clean water. WHITE WATER SPIRIT TRANSPORTATION & STORAGE Do not use or store in extremes of temperature and protect from frost. To prevent spillage, please store and transport upright. VOC EU limit value for this product (cat A/b) : 100g/l (2010) This product contains max. 8g/l VOC Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease and salts. New plaster and masonry must be fully dry before priming. VOC Content Low 0.30% - 7.99%. VOCs (Volatile Organic Compounds) contribute to atmospheric pollution. FURTHER SUPPORT Brush, roller, spray & airless spray. As with other water-based paints, do not apply in temperatures below 8ºC (as recommended by British Standard BS 6150) Online: www.armsteadtrade.co.uk Email: [email protected] Phone: 08444-817-818 Please visit www.armsteadtrade.co.uk to download safety sheet SDSAM203 SYSTEM INFORMATION Stir thoroughly before use. On very absorbent surfaces apply a sealing coat of thinned Armstead Trade Vinyl Silk. Finishing: Apply 1 or 2 coats of Armstead Trade Vinyl Silk. Note: Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead. Let’s create together a better future for our planet. Find out how at: www.armsteadtrade.co.uk/pp AkzoNobel, the AkzoNobel logo, Armstead, and Planet Possible are trademarks of the AkzoNobel group © AkzoNobel 2014