PRODUCT DESCRIPTION & USE Armstead Trade Vinyl Matt is a professional quality matt emulsion that minimises surface imperfections. Suitable for all normal interior and ceiling surfaces. Particularly suited for large job applications in commercial, institutional and industrial structures. A guide to the practical coverage which can be achieved under normal conditions is up to 14m2/litre. WHITE WATER SPIRIT Good opacity Minimises surface imperfections For interior walls & ceilings PACK SIZES Sealing new/bare surfaces: Normal use: Conventional spray application: Airless spray application: Add up to 1 part clean water to 10 parts paint. Thinning is not required. Add up to 1 part clean water to 5 parts paint. Thinning is not required. COLOUR RANGE Armstead Trade Exclusive: BS4800: RAL: NCS 1 & 2: 150 colours 100 colours 45 colours 3487 colours Visit www.armsteadtrade.co.uk/pp Conventional Spray: Satisfactory through most equipment. Airless Spray: A typical recommendation for airless spray application is a minimum working pressure on paint of 140 kg/cm2 (2000 Ib/sq in) with a spray tip size 0.38mm (15 thou) and a spray tip angle 65°. DRYING TIMES (SINGLE COAT, STANDARD THICKNESS) FILM PROPERTIES Chemical Resistance: Not suitable. Heat Resistance: Not suitable for use on heated surfaces e.g. radiators. Water Resistance: Will tolerate the levels of atmospheric humidity present in normal interior environments. WHITE WATER SPIRIT COMPOSITION (NOMINAL) Pigment: Binder: Solvent: Lightfast Pigments. Acrylic Copolymer Emulsion. Water. VOLUME SOLIDS 32% (nominal) for Brilliant White, colours will vary. SURFACE PREPARATION Surfaces must be sound, clean, dry and free from all defective or poorly adhering material, dirt, grease and salts. New plaster and masonry must be fully dry before priming. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. APPLICATION Brush, roller, spray & airless spray. As with other water-based paints, do not apply in temperatures below 8ºC (as recommended by British Standard BS 6150) *Dependent upon temperature and humidity. After use, remove as much paint as possible from equipment before cleaning with clean water. TRANSPORTATION & STORAGE Do not use or store in extremes of temperature and protect from frost. To prevent spillage, please store and transport upright. VOC EU limit value for this product (cat. : A/a) : 30g/l (2010) This product contains max. 8g/l VOC VOC Content Low 0.30% - 7.99%. VOCs (Volatile Organic Compounds) contribute to atmospheric pollution. FURTHER SUPPORT Online: www.armsteadtrade.co.uk Email: [email protected] Phone: 08444-817-818 Please visit www.armsteadtrade.co.uk to download safety sheet SDSAM202 Like us on Facebook SYSTEM INFORMATION Follow us on Twitter Stir thoroughly before use. On very absorbent surfaces apply a sealing coat of thinned Armstead Trade Vinyl Matt. Finishing: Apply 1 or 2 coats of Armstead Trade Vinyl Matt. Note: Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead. Let’s create together a better future for our planet. Find out how at: www.armsteadtrade.co.uk/pp AkzoNobel, the AkzoNobel logo, Armstead, and Planet Possible are trademarks of the AkzoNobel group © AkzoNobel 2014