Armstead Trade Stabilising Primer


Catalog excerpts

Armstead Trade Stabilising Primer - 1

SYSTEM INFORMATION Armstead Trade Stabilising Primer is a professional quality, clear solvent-based primer, formulated to seal powdery exterior masonry surfaces that can be used with most decorative finishes. Shake container vigorously before use. After suitable preparation, the normal recommendation is to apply one coat of Armstead Trade Stabilising Primer to powdery surfaces, followed by the appropriate Armstead Trade exterior finishing system. Seals porous, dry & powdery surfaces Resists alkali attack Use with Armstead Trade Masonry finishes A guide to the practical coverage which can be achieved under normal conditions is up to 12m2/litre. WHITE WATER SPIRIT PACK SIZES DRYING TIMES (SINGLE COAT, STANDARD THICKNESS) 5L COLOUR RANGE Clear. Pigment: Binder: Solvent: N/A. Oleoresin. White Spirit. VOLUME SOLIDS *These times will be significantly longer in cold damp conditions. COMPOSITION (NOMINAL) After use, remove as much paint as possible from brushes before cleaning white spirit. BRUSH WATER CLEANER TRANSPORTATION & STORAGE Do not use or store in extremes of temperature and protect from frost. To prevent spillage, please store and transport upright. SURFACE PREPARATION EU limit value for this product (cat.A/h): 750g/l (2007)/750g/l (2010). This product contains max.670g/l VOC. All surfaces should be thoroughly prepared by vigorous scraping and brushing to remove any loose or flaking paint and dirt. A sti fibre brush will give better results than a wire brush, as any wire that becomes embedded in the wall will rust, and stain the new paint. Treat any existing mould or organic growth with *Weathershield Multi-Surface Fungicidal Wash. Make good minor defects. Use a sand and cement mix for larger holes and cracks. Note: Do not seal sound new or bare surfaces with stabilising primer. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead. APPLICATION up to 15M /L 14M2/L 9M2 16-24h 6-16h 4-6h 2-4h WHITE WATER SPIRIT Brush or roller. For Health and Safety reasons related to all solvent-based paints, spray application is not recommended.. *Weathershield Multi-Surface Fungicidal Wash contains: Benzalkonium Chloride. Use biocides safely. Always read the label and product information before use. VOC Content Very High more than 50%. VOCs (Volatile Organic Compounds) contribute to atmospheric pollution. FURTHER SUPPORT Online: Email: Phone: 08444-817-818 Please visit to download safety sheet SDSAM301 Like us on Facebook Follow us on Twitter As with other solvent-based paints, do not apply in temperatures below 5ºC (as recommended by British Standard BS 6150). Let’s create together a better future for our planet. Find out how at: AkzoNobel, the AkzoNobel logo, Dulux Trade Weathershield and Planet Possible are trademarks of the AkzoNobel group © AkzoNobel 2014

Open the catalog to page 1

All Dulux catalogs and technical brochures


    1 Pages


    3 Pages


    3 Pages


    3 Pages

  5. Diamond Range

    16 Pages

  6. T30314

    20 Pages

  7. T30064

    4 Pages

  8. T30028

    20 Pages

  9. T30345

    44 Pages

  10. T28107

    2 Pages

  11. T28114

    2 Pages

  12. T29241

    4 Pages

  13. T30089

    8 Pages

  14. Veri-Tag

    2 Pages

  15. T30308

    2 Pages

  16. T12134

    2 Pages

  17. colour guide

    15 Pages