video corpo

DS113

DS113
1 / 22 PagesView full catalog

DS113

Product catalog summary
Overview: This document outlines the technical specifications and installation guidelines for Fedderlite® DS113 lightweight insulated exterior wall panels, emphasizing fabrication and installation procedures.
Specifications: The Fedderlite Panel System is intended for diverse architectural applications and must adhere to local building codes and standards. The design professional of the project is responsible for the architecture, engineering, and design when using Dryvit products.
Procedures: For face fastening, channels should extend at least 1/2 inch beyond panel edges. If there is an air space between the panel and the wall during installation, the panel must be fully encapsulated with a reinforced base coat.
Recommendations: It is recommended to reinforce the base coat with Panzer Mesh for ground floor applications and facades exposed to high stress, traffic, or impact. High impact zones should be clearly marked on contract drawings.
Standards and Liability: The document provides general guidance and disclaims liability for the use of its details. It stresses the importance of using the latest version of the details and advises contacting Dryvit for updates.
Details: The document includes construction details such as panel joints, parapet, foundation, head, jamb, sill, fascia/soffit, aesthetic reveals, and abutting dissimilar materials. These details are subject to change and should be assessed by the project design professional for their suitability.
See more

Catalog excerpts

DS113-1

Fedderlite® DS113 Lightweight Insulated Exterior Wall Panels Fedderlite Panel System Fabrication/Installation Details 1-02

 Open the catalog to page 1
DS113-2

Fedderlite APPROVED BY: REV: 2 R DATE: RS 1/02 Printed in U.S.A. C 1998 Dryvit The architecture, engineering and design of the project using the and Dryvit specifically disclaims any liability for the use of this without notice. Contact Dryvit to insure you have the most recent does not violate Dryvit's warranty. This detail is subject to change is best suited for the project. Use of a functionally equivalent detail discretion, whether this detail or a functionally equivalent alternative any project. The project design professional determines, in its sole detail and for the architecture, design,...

 Open the catalog to page 2
DS113-3

Fedderlite DRYVIT RECOMMENDS THAT GROUND FLOOR APPLICATIONS AND ALL FACADES EXPOSED TO ABNORMAL STRESS, HIGH TRAFFIC, OR DELIBERATE IMPACT HAVE THE BASE COAT REINFORCED WITH PANZER MESH PRIOR TO STANDARD OR STANDARD PLUS MESH. LOCATION OF HIGH IMPACT ZONES SHOULD BE INDICATED ON CONTRACT DRAWINGS. 1998 Dryvit Printed in U.S.A. C 1. NOTE: TM APPROVED BY: R TM REV: 2 R The architecture, engineering and design of the project using the Dryvit products is the responsibility of the project's design professional. All systems must comply with local building codes and standards. This detail is for general...

 Open the catalog to page 3
DS113-4

Fedderlite DRYVIT RECOMMENDS THAT GROUND FLOOR APPLICATIONS AND ALL FACADES EXPOSED TO ABNORMAL STRESS, HIGH TRAFFIC, OR DELIBERATE IMPACT HAVE THE BASE COAT REINFORCED WITH PANZER MESH PRIOR TO STANDARD OR STANDARD PLUS MESH. LOCATION OF HIGH IMPACT ZONES SHOULD BE INDICATED ON CONTRACT DRAWINGS. 1998 Dryvit Printed in A.S.A.P. C 1. NOTE: TM APPROVED BY: R TM REV: 2 The architecture, engineering and design of the project using the Dryvit products is the responsibility of the project's design professional. All systems must comply with local building codes and standards. This detail is for general...

 Open the catalog to page 4
DS113-5

Fedderlite DRYVIT RECOMMENDS THAT GROUND FLOOR APPLICATIONS AND ALL FACADES EXPOSED TO ABNORMAL STRESS, HIGH TRAFFIC, OR DELIBERATE IMPACT HAVE THE BASE COAT REINFORCED WITH PANZER MESH PRIOR TO STANDARD OR STANDARD PLUS MESH. LOCATION OF HIGH IMPACT ZONES SHOULD BE INDICATED ON CONTRACT DRAWINGS. 1998 Dryvit Printed in U.S.A. C 1. NOTE: TM APPROVED BY: R TM REV: 2 R The architecture, engineering and design of the project using the Dryvit products is the responsibility of the project's design professional. All systems must comply with local building codes and standards. This detail is for general...

 Open the catalog to page 5
DS113-6

Fedderlite DRYVIT RECOMMENDS THAT GROUND FLOOR APPLICATIONS AND ALL FACADES EXPOSED TO ABNORMAL STRESS, HIGH TRAFFIC, OR DELIBERATE IMPACT HAVE THE BASE COAT REINFORCED WITH PANZER MESH PRIOR TO STANDARD OR STANDARD PLUS MESH. LOCATION OF HIGH IMPACT ZONES SHOULD BE INDICATED ON CONTRACT DRAWINGS. 1. NOTE: TM APPROVED BY: R TM REV: 2 R Fedderlite Panel Joint DATE: 1/02 Printed in U.S.A. C 1998 Dryvit The architecture, engineering and design of the project using the and Dryvit specifically disclaims any liability for the use of this without notice. Contact Dryvit to insure you have the most recent...

 Open the catalog to page 6
DS113-7

Fedderlite DRYVIT RECOMMENDS THAT GROUND FLOOR APPLICATIONS AND ALL FACADES EXPOSED TO ABNORMAL STRESS, HIGH TRAFFIC, OR DELIBERATE IMPACT HAVE THE BASE COAT REINFORCED WITH PANZER MESH PRIOR TO STANDARD OR STANDARD PLUS MESH. LOCATION OF HIGH IMPACT ZONES SHOULD BE INDICATED ON CONTRACT DRAWINGS. 1. NOTE: TM APPROVED BY: R TM REV: 2 R Parapet Detail DATE: 1/02 Printed in U.S.A. C 1998 Dryvit The architecture, engineering and design of the project using the and Dryvit specifically disclaims any liability for the use of this without notice. Contact Dryvit to insure you have the most recent does...

 Open the catalog to page 7
DS113-8

Fedderlite DRYVIT RECOMMENDS THAT GROUND FLOOR APPLICATIONS AND ALL FACADES EXPOSED TO ABNORMAL STRESS, HIGH TRAFFIC, OR DELIBERATE IMPACT HAVE THE BASE COAT REINFORCED WITH PANZER MESH PRIOR TO STANDARD OR STANDARD PLUS MESH. LOCATION OF HIGH IMPACT ZONES SHOULD BE INDICATED ON CONTRACT DRAWINGS. 1. NOTE: TM APPROVED BY: R TM REV: 2 R Foundation Detail - A DATE: 1/02 Printed in U.S.A. C 1998 Dryvit The architecture, engineering and design of the project using the and Dryvit specifically disclaims any liability for the use of this without notice. Contact Dryvit to insure you have the most recent...

 Open the catalog to page 8
DS113-9

Fedderlite DRYVIT RECOMMENDS THAT GROUND FLOOR APPLICATIONS AND ALL FACADES EXPOSED TO ABNORMAL STRESS, HIGH TRAFFIC, OR DELIBERATE IMPACT HAVE THE BASE COAT REINFORCED WITH PANZER MESH PRIOR TO STANDARD OR STANDARD PLUS MESH. LOCATION OF HIGH IMPACT ZONES SHOULD BE INDICATED ON CONTRACT DRAWINGS. 1. NOTE: TM APPROVED BY: R TM REV: 2 R Foundation Detail - B DATE: 1/02 R Printed in U.S.A. C 1998 Dryvit The architecture, engineering and design of the project using the and Dryvit specifically disclaims any liability for the use of this without notice. Contact Dryvit to insure you have the most recent...

 Open the catalog to page 9
DS113-10

Fedderlite 1. NOTE: TM APPROVED BY: R TM REV: 2 R Head Detail DATE: 1/02 DRYVIT RECOMMENDS THAT GROUND FLOOR APPLICATIONS AND ALL FACADES EXPOSED TO ABNORMAL STRESS, HIGH TRAFFIC, OR DELIBERATE IMPACT HAVE THE BASE COAT REINFORCED WITH PANZER MESH PRIOR TO STANDARD OR STANDARD PLUS MESH. LOCATION OF HIGH IMPACT ZONES SHOULD BE INDICATED ON CONTRACT DRAWINGS. Printed in U.S.A. C 1998 Dryvit The architecture, engineering and design of the project using the and Dryvit specifically disclaims any liability for the use of this without notice. Contact Dryvit to insure you have the most recent does not...

 Open the catalog to page 10
DS113-11

Fedderlite DRYVIT RECOMMENDS THAT GROUND FLOOR APPLICATIONS AND ALL FACADES EXPOSED TO ABNORMAL STRESS, HIGH TRAFFIC, OR DELIBERATE IMPACT HAVE THE BASE COAT REINFORCED WITH PANZER MESH PRIOR TO STANDARD OR STANDARD PLUS MESH. LOCATION OF HIGH IMPACT ZONES SHOULD BE INDICATED ON CONTRACT DRAWINGS. 1. NOTE: TM APPROVED BY: R TM REV: 2 R Jamb Detail DATE: 1/02 Printed in U.S.A. C 1998 Dryvit The architecture, engineering and design of the project using the and Dryvit specifically disclaims any liability for the use of this without notice. Contact Dryvit to insure you have the most recent does not...

 Open the catalog to page 11
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.