DRI-DESIGN DESIGN GUIDE Advanced Finishing Technology (AFT) 17 Dri-Design® with DuPont™ Corian® EC 18-19 Corner and Column Parameters 24

DRI-DESIGN METAL WALL PANELS Through research and real life experience in the metal panel industry, Dri-Design was invented to solve what were viewed as significant shortfalls of traditional metal panel systems: delamination, staining due to the effects of weather on joints and gaskets, a lack of color and texture options, the rising cost of production and inefficient installation practices. The result of Dri-Design’s meticulous engineering is a 100% recyclable, pressure equalized rain-screen, architectural metal wall system that attaches to nearly any substrate without the use of clips or extrusions....

DRI-DESIGN’S ENVIRONMENTAL FOOTPRINT At Dri-Design we strive to continually improve our Sustainability practices and products through innovation. We are dedicated to developing sustainable products while looking at all aspects of the environmental impact. MADE LOCAL Dri-Design purchases its aluminum from domestic mills which saves transportation energy costs. Dri-Design uses no joint sealants or gaskets which are made with petroleum, saving fossil fuels and future maintenance costs. RECYCLED AND RECYCLABLE Dri-Design wall panels are made with recycled metal, are 100% recyclable and can be repurposed....

Technical Information: System Depth - 1 ¼” nominal Panel Size Parameters: These are the recommended maximum size panel guides. If the panel you would like fits inside these guides, Dri-Design can easily manufacture it. For larger sizes, please contact a Dri-Design representative to discuss your specific requirements.

Technical Information: System Depth - 1 ¼” nominal Panel Size Parameters: These are the recommended maximum size panel guides. If the panel you would like fits inside these guides, Dri-Design can easily manufacture it. For larger sizes, please contact a Dri-Design representative to discuss your specific requirements.

Technical Information: System Depth - 1 ¼” nominal Panel Size Parameters: These are the recommended maximum size panel guides. If the panel you would like fits inside these guides, Dri-Design can easily manufacture it. For larger sizes, please contact a Dri-Design representative to discuss your specific requirements.

Technical Information: System Depth - 1 ¼” nominal Dri-Design’s ease of installation and enduring design make it the perfect system for adding the character of copper to your project. And, since sealants and gaskets are never used in the joints, they can never stain or streak this beautiful finish. Dri-Design with the natural elegance of bright copper or the unmistakable look of copper patina can add distinction to any facade. Panel Size Parameters: These are the recommended maximum size panel guides. If the panel you would like fits inside these guides, Dri-Design can easily manufacture it....

Technical Information: System Depth - 1 ¼” nominal Panel Size Parameters: These are the recommended maximum size panel guides. If the panel you would like fits inside these guides, Dri-Design can easily manufacture it. For larger sizes, please contact a Dri-Design representative to discuss your specific requirements.

1.5 mm ANTHRA-ZINC®, QUARTZ-ZINC® and Colors shown are representational only. PIGMENTO® QUARTZ-ZINC® QUARTZ-ZINC® ANTHRA-ZINC®® ANTHRA-ZINC PIGMENTO® green 1 mm ANTHRA-ZINC® and QUARTZ-ZINC® and PIGMENTO® Colors shown are representational only. PIGMENTO® blue PIGMENTO® brown

Technical Information: System Depth - 1 ¼” nominal Panel Joints - ½” nominal standard (1/8” – 1” available) Pre-Weathered Steel Virtually any flat or slightly embossed metal can be used in Dri-Design Panel Systems. Select a metal that conveys your vision, and we will manufacture a panel that completes your design.

Technical Information: System Depth - 1 ¼” – 4” for aluminum and 1 ¼” – 3” for VMZINC® Panel Size Parameters: These are the recommended maximum size panel guides. If the panel you would like fits inside these guides, Dri-Design can easily manufacture it. For larger sizes, please contact a Dri-Design representative to discuss your specific requirements.

Technical Information: System Depth - Starting depth from 1 ¼” - 4” with taper to 1 ¼” - 4” nominal. Weight - Varies based on material type

Technical Information: System Depth - 1 ¼” – 4” nominal, including tapered and shadow Material - Aluminum, VMZINC®, Copper and Stainless Steel A stunning combination of functionality and aesthetics – the Perforated Panel Series provides necessary airflow to a structure without sacrificing style or design. Virtually any shape and pattern can be perforated into the panels and used for a myriad of applications.

Technical Information: System Depth - 1 ¼” – 4” nominal, including tapered and shadow Material - Aluminum, VMZINC®, Copper and Stainless Steel Perforations - Most sizes and shapes. Density and location will vary depending on the image and specific needs of the project. Please speak with a Dri-Design representative about specific requests. Weight - Varies based on material type Dri-Design with Perforated Imaging uses advanced computer based manufacturing to create complex images using perforations. By varying the size, location and density of the perforations, areas of light, dark and shades in...

Technical Information: System Depth - 1 ¼” – 4” nominal, including tapered and shadow Material - Aluminum, VMZINC®, Copper and Stainless Steel With our Embossed Panel, there is essentially no limit to the design possibilities or applications. Almost any shape or feature, convex or concave, can be embossed into the Dri-Design panels to create a distinctive, three dimensional accent.