TD-10R
6Pages

EPA Tier 3/EU Stage IIIA STANDARD, LGP Emissions standard Displacement Bore and stroke Gross horsepower, SAE J1995 Net horsepower, SAE J1349/ISO 9249 Rated rpm Max. torque Air cleaner Cummins QSB4.5 EPA Tier 3/EU Stage IIIA 4.5 l (275 in3) 102 x 137 mm (4.02 in x 5.42 in) 82 kW (110 hp) 76 kW (101 hp) Engine coolant rating OPERATOR STATION 2500 488 Nm (306 ft-lb) @ 1500 rpm 2-stage, dry type with service indicator Pump displacement 75.2 l/min (19.9 gpm) System relief pressure 15.5 MPa (2,250 psi) Lights front- ROPS or cab (2), rear (2) Control single joystick lever

A Overall Height -Cab ROPS/FOPS 2.72 m (8 ft 11.2 in) B Grouser height C Ground clearance D Overall length, base machine E Length with Blade E1 Length with Blade and Ripper F Blade Lift Height G Blade Digging Depth H Blade Cutting-Edge Angle, Adjustable I Blade Width J Blade Height SAE Capacity K Blade Angle L Overall Width with Blade Angled M Blade Tilt N Track Length on Ground O Width Over Track P Track Gauge

Heavy-duty parallelogram 5-shank ripper Weight, complete (w/3 shanks) Weight of Shank Shank positions (vertical) Q Maximum Penetration R Maximum Clearance Under Tip S Overall Beam Width T Slope Angle (full raise) U Ripping Width V / V1 Spacing Center to Center OPERATING WEIGHTS Base Weight (with 6-WAY 9525 kg 9638 kg (blade, standard equipment, (21000 lb) (21248 lb) Cab ROPS/FOPS, full fuel tank, and 79-kg [175 lb] operator) Optional Components Ripper w/3 shanks 510 kg (1120 lb) Refill capacities Fuel Tank Cooling System Engine Oil Hydraulic Reservoir Final Drive, Each Side...

POWERTRAIN TD-10R Transmission Single stage 280 mm (11 in) torque converter with a 2.153:1 stall ratio drives to transmission through a double universal joint. Modular, countershaft type power shift transmission, electro-hydraulic control. Preset travel speed and auto-downshift. Steering Single stage planetary type, wet single disc steering clutches. Single disc, wet-type steering brakes. Steering clutches and brakes run in oil and are hydraulically actuated. Final drives Single stage spur-gear drive to sprockets. Total ratio 8.1 to 1 Travel speeds Gear Forward Reverse drawbar...

ENGINE & COOLING Engine, Cummins QSB4.5, Tier 3, emission certified, turbocharged, direct injection, 76 kW (101 fwhp) Air cleaner, dry type, with primary and safety elements and service indicator Antifreeze, -34°F (-37°C) Cooling module; includes radiator, transmission oil cooler and charge air cooler; isolation mounted Engine speed control knob, L.H. location Fan, blower Muffler, underhood with exhaust pipe and elbow Strainer, fuel Water separator, fuel system DRIVETRAIN Torque converter, single stage Transmission, full power shift, 3 speeds forward, 3 reverse Steering, left hand single...

BLADE EQUIPMENT Standard Angle Dozer (6-way) (STD), 2.15 m3 (2.81 yd3), inside arm with hydraulic tilt and angle (Blade width is 117”) Wide Angle Dozer (6-way) (LGP), 2.21 m3 (2.89 yd3), inside arm with hydraulic tilt and angle (Blade width is 120”) REAR MOUNTED EQUIPMENT Ripper with 3 teeth, provision for 5 teeth. Includes 4-spool valve, 2-lever (”T” + single) Deducts retrieval hitch. Extra ripper tooth, complete with tip TRACK SHOES 610 mm (24 in) shoes, single grouser, OPERATOR’S ENVIRONMENT Heater/pressurizer/defroster Air conditioner/heater/pressurizer/defroster For use with cab •...