FLUIPAV 501
3Pages

FLUIPAV 501 SUPERPLASTICIZER SPECIFICALLY DESIGNED FOR INDUSTRIAL CONCRETE FLOORING IMPROVED PUMPABILITY CONCRETE LINE ADMIXTURES FOR INDUSTRIAL CONCRETE FLOORING BENEFITS When the concrete is properly prepared the use of FLUIPAV 501 permits: ✓ A significant reduction in the Water / Cement ratio resulting in reduced drying shrinkage and curling. ✓ The preparation of concrete with consistency class S5 (slump 21 - 24) while at the same time preventing the risk of segregation and bleeding of the mix. ✓ FLUIPAV 501 provides workability times of between 2 to 3 hours and a finishing time of 5 hours even at temperatures below 10°C. ✓ Improved pumpability of the mix, making it easier to finish the surface and incorporate the sand finish, thanks to the presence of surface tension modifiers. ✓ A reduction in setting times thus reducing the time required for installation and floating of the concrete. ✓ An increase in the mechanical strength, waterproof properties and durability of the concrete. ✓ A reduction in bleeding, segregation and cracking phenomena, thanks to the ideal balance between fluidifying and cohesive properties. ✓ It prevents the hardening of the surface layer (false set). ✓ Used in combination with PRESIDIO SRA internal curing it reduces plastic and drying shrinkage in particularly unfavourable climatic conditions. USES FLUIPAV 501 is ideal for: ✓ Industrial concrete floors even when installing at low temperatures. ✓ Industrial floors with jointless technology and low thickness (Draco Basso Spessore system). ✓ Post-tensioned industrial flooring and monolithic slab- floor systems. ✓ Multi-storey car parks, yards, processing and logistics areas in concrete prepared with laser screed systems. DRACO Italiana SpA • via Monte Grappa, 11 D-E • 20067 Tribiano (MI) t. +39 02 90632917 • f. +39 02 90631976 • info@draco-edilizia.it FLUIPAV 501 is an admixture specifically formulated for concrete floors that exploits DRACO’s considerable experience in industrial flooring. Product development focused on management of the setting time, pumpability and cohesion of the mix to ensure superior quality when lay

CONCRETE LINE WORKABILITY OVER TIME The use of FLUIPAV 501 in the concrete allows you to maintain the workability obtained with the admixture over a period of time that will vary depending on the type of cement, the amount of admixture used and the temperature. At temperatures between 10 °C and 55 °C, FLUIPAV 501 ensures workability of approx. 2-3 hours. Finishing time may vary from 5 to 7 hours depending on the amount of admixture and cement used the ambient temperature and the temperature of the concrete, as well as the presence of a vapour barrier. Loss of workability occurs gradually....

CONCRETE LINE PRODUCT CHARACTERISTICS APPEARANCE COLOUR Liquid Brown Reduction W/ C ratio and/or increased workability SECONDARY ACTION Hardening accelerator 1 to 1.6 kg per tra unità vendute per anno 100 kg of cement Confronto CUSTOMS NUMBER SHELF LIFE Surface finishing times 12 10 Finishing times according to temperature No admixture Admixtured with 1.1% FLUIPAV 501 Admixtured with 1.5% FLUIPAV 501 TECHNICAL SPECIFICATIONS In order to obtain optimum technical and working results concrete with predetermined resistance (Rck) used for the work described in the present specification will be...