DACOTERM RINZAFFO ANTISALE
3Pages

DACOTERM RINZAFFO ANTISALE Breathable, fibre-reinforced mortar for rendering walls and concrete structures It is used in the DACOTERM system RENOVATION AND BIOARCHITECTURE Line NATURAL MORTARS AND PLASTERS FOR THE RENEWAL AND PROTECTION OF STRUCTURES DACOTERM RINZAFFO ANTISALE is an adhesion-promoting mortar protecting surfaces from a wide range of salts. It is based on natural hydraulic and inert binders and is resistant to salts. Its properties make it suitable for any application on all types of wall with rising damp and salt bloom and prior to the application of DACOTERM EVOLUTION. ©Copyright 2010 -All rights reserved -The following specifications provide reliable details about our current best knowledge and know-how. Changes may take place according to the accuracy of the application steps we shall not be held responsible for. For this reason, our warranty only covers the quality and life of the products according to their specifications. This issue invalidates and replaces the previous ones. BENEFITS ✓✓ ANTI-SALT ACTIVITY: DACOTERM RINZAFFO ANTISALE is resistant to soluble salts, which shall not be transmitted to the next plaster. ✓✓ HIGH BOND STRENGTH: DACOTERM RINZAFFO ANTISALE ensures an excellent bond to the underlying substrate. ✓✓ Breathable and dehumidifying: thanks to its high breathability, DACOTERM RINZAFFO ANTISALE ensures the migration of water vapour. ✓✓ IT MAKES THE BONDING LAYER FOR THE NEXT PLASTER: DACOTERM RINZAFFO ANTISALE makes the substrate uniform and provides an excellent mechanical bonding for the next application of the thermo-insulating plaster DACOTERM EVOLUTION. ✓✓ Easy laying: DACOTERM RINZAFFO ANTISALE is easily workable and applied both manually and with plastering machine. ✓✓ Chemical-physical compatibility with the existing walls: modulus of elasticity, porosity and mechanical features of DACOTERM RINZAFFO ANTISALE are compatible with historical walls. AREAS OF APPLICATION DACOTERM RINZAFFO ANTISALE is ideal for: ✓✓ Works of insulation and renewal on walls subject to strong rising damp in combination with the natural thermo-insulating plaster DACOTERM EVOLUTION. ✓✓ Application onto surfaces made of bricks, stones, mixed structures, tuff and concrete. ✓✓ Make the first bonding layer for insulating plasters on poor-adhesion surfaces. how to use PRODUCT PREPARATION ‣‣ Mix DACOTERM RINZAFFO ANTISALE in a cement mixer for about 3-4 minutes with water at the rate of 6 litres per each 25 kg bag (about 24%). Slowly add the product and mix for at least 4 ÷ 5 minutes till getting a well-blended and lump-free mix. Check that all of the product has been correctly mixed and that no residues of dust have remained along the walls and on the bottom of the container. DRACO Italiana SpA • via Monte Grappa, 11 D-E • 20067 Tribiano (MI) t. +39 02 90632917 • f. +39 02 90631976

DACOTERM RINZAFFO ANTISALE RENOVATION AND BIOARCHITECTURE Line APPLICATION ‣‣ Before the application of DACOTERM RINZAFFO ANTISALE it is recommended to wet the walls, yet leaving no films of water on the surface. DACOTERM RINZAFFO ANTISALE may be applied manually with trowel or with plastering machine, by making a minimum layer of 1 cm. ‣‣ Evenly apply the product with trowel without rendering, taking care to completely cover the surfaces and to make a minimum layer of at least 1 cm. If the substrate is particularly uneven, non-cohesive, with large grout lines in noncohesive mortar, with...

^RACO" RENOVATION AND BIOARCHITECTURE LINE l. A PRODUCT FEATURES APPEARANCE COLOUR PACKAGE STORAGE APPLICATION DATA 20°C - 50% R.H. COLOUR OF MIX MIXING WATER CONSISTENCY AT THE FLOW TABLE TEST - EN 1015-3 DENSITY Of MIx - EN 1015-6 BuLKVOLuME - 12190 minimum thickness MAxIMuM THICKNESS application temperature range setting start time SETTING END TIME curing TIME FOR THE COATING pHASE compressive STRENGTH AFTER 28 days - EN 12190 flexural STRENGTH AFTER 28 DAYS - EN 196-1 consumption ITEM SPECIFICATIONS Type of work - Insulation of old and new masonry by using breathable,...