Xitanium spot-/downlight drivers Xitanium LED drivers are designed to operate LED solutions for general lighting applications such as downlighting and spot/accent lighting. Reliability is guaranteed for 5 years, enhanced by specific features that protect the connected LED module, e.g. hot wiring, reduced ripple current and thermal de-rating. Most drivers feature central DC operation. In the coming years LEDs will continue to increase in efficiency, creating generation and complexity challenges for OEMs. With Xitanium LED drivers, flexibility in luminaire design is assured thanks to an adjustable output current. Application-oriented operating windows offer the flexibility required to provide the stable lumen output and light quality levels that lighting specifiers and architects demand. The adjustable output current also enables operation of various LED PCB solutions from different manufacturers. Touch/Dali driver with DALI dimming Inrush current 1/2 value time Power factor Wire cross section Touch / DALI dimmable SLM 3000lm/Pro Color passive non dim. Driver (36W driver) SLM 3000lm/Pro Color passive TD Driver (36W driver) Touch / DALI dimmable SLM Pro Color active 3800lm non dim. Driver (50W driver) SLM Pro Color active 3800lm TD Driver (50W driver) Touch / DALI dimmable *Values refer to the standard drivers supplied with downlights. Drivers used in Surface Mounted/Suspended luminaires, Lounge luminaires or profiles may have other characteristics. Black wire: LED Red/Pink wire: LED + SLM driver (only for Downlights*) Black wire: LED Red/Pink wire: LED + Black wire: LED Red/Pink wire: LED + Normally open (NO) switch Driver FGND Touch/Dali driver with Touch dimming Driver setting The output current of Xitanium drivers can be adjusted. This can be done using a plug which is inserted in the driver. Always make sure the correct plug is inserted otherwise the LED can be damaged due to an incorrect current.