INSTA-STIKTMMP

Product catalog summary

Product Overview:
INSTA-STIK MP is a fast-curing, multi-purpose adhesive designed for fixing plasterboard, insulation board, and various building substrates. It is applied using a low expansion gun and cures within 3 to 5 minutes.

Key Features:

Easy to handle and transport, eliminating the need for heavy bags of drywall adhesive.
One can covers approximately 13m² (fixes about five 1.2m x 2.4m plasterboards).
No preparation time required, leading to a 30-35% time and cost saving.
No additional tools, water, or mixing needed.
Reusable until empty, with no waste or mess.
Allows plastering one hour after application, reducing wait time.
Typically, no secondary mechanical fixings are required.

Benefits:

Quick and easy to use, reducing overall job costs.
Increases insulation value and is less sensitive to temperature variations.
Adheres to most common building materials, including polystyrene, plaster, metal, wood, concrete, and more.
Minimal expansion, effectively filling gaps on uneven surfaces.

Application Instructions:

Shake the adhesive can vigorously for about 30 seconds.
Attach the can to the PU spray gun by screwing it onto the valve.
Spray adhesive beads onto the substrate and fix within 4 minutes, pressing firmly.

Safety and Maintenance:

Ensure the workplace is hazard-free and wear protective gloves and eyewear.
Surfaces, especially metal, should be free from oil and grease.
Curing time varies with temperature and humidity; adjust conditions as needed.
For fire-rated applications, one mechanical fixing per board is required.
Clean the PU spray gun with Gun Cleaner from Geocel and remove cured foam mechanically.

Manufacturer Information:
Geocel Ltd., a strategic partner of Dow Chemical Co Ltd, provides this product. For further instructions or specific advice, contact Geocel's Technical Services Department.

Catalog excerpts

INSTA-STIK MP adhesive INSTANT ADVANTAGES G NO heavy bags of dry wall adhesive Easy to handle and transport 1 can will go further than a 25kg bag 1 can will fix approximately 5 (1.2m x 2.4m) plasterboards (13m2) G New FAST CURE Multi-Purpose adhesive NO preparation time, can ready for immediate use = 30-35% time saving = cost saving NO additional tools required NO water or mixing required NO waste or mess, INSTA-STIK MP can be reused until empty For fixing plasterboard, insulation board and many more building substrates NO need to wait, you can plaster 1 hour after application instead of having to come back the next day NO secondary mechanical fixings normally required Pack Size: 750ml Gun Application Can 3 to 5 minutes cure time Geocel Ltd., Western Wood Way, Langage Science Park, Plympton, Plymouth PL7 5BG T 01752 334350 F 01752 202065 E [email protected] www.geocel.co.uk A strategic partner of Dow Chemical Co Ltd Low expansion gun applied adhesive ®™Trademark of The Dow Chemical Company (“Dow”) or an affiliated company Note: The information and data contained in this brochure do not represent exact sales specifications. The features of the products mentioned may vary. The information contained in this document has been provided in good faith, however it does not imply any liability, guarantee or assurance of product performance. It is the purchaser’s responsibility to determine whether these Dow products are suitable for the application desired and to ensure that the site of work and method of application conform with current legislation. No licence is hereby granted for the use of patents or other industrial or intellectual property rights. If Dow products are purchased, we advise following the most up-to-date suggestions and recommendations. As simple as 1 G Shake 2 G Click 3 G Start UNLIKE ANYTHING YOU HAVE TRIED BEFORE

Open the catalog to page 1

INSTA-STIK MP (MultiPurpose) adhesive is gun applied, fast curing and low expansion. Quick, easy and clean to use, INSTA-STIK MP adhesive is ideal for fixing plasterboard, insulation board and most common building substrates. The amount of adhesive can be regulated through the trigger and screw at the back of the applying gun, and can be applied directly to the substrate. 1 2 3 G Shake G Click G Start 1 G Shake the MP INSTA-STIK adhesive can vigorously for about 30 seconds. Apply adhesive to wall (or board) Fills an uneven surface yet fixes tight to the wall Lower overall job costs Increases...

Open the catalog to page 2