Double Connector System
2Pages

INTERLOCKING SYSTEMS LIGHT MANAGEMENT PRODUCTION STANDARDS TECHNICAL FEATURES Thickness Structure Modular width Panel length Thermal insulation Acoustic insulation Linear thermal expansion Temperature range UV rays protection Fire reaction EN 13501 The polycarbonate system in the triplelayer version assembled with a unique Double Connector greatly reduces the heat loss of the translucent facades. While a high-performance glass infix is able to arrive to a thermal transmittance of 1.2 Wm2K, dual-chamber polycarbonate system reaches a value of 0.62 W/m2K. The Double Connector arcoPlus system consists of two, six-wall arcoPlus®626 panels united by a particular polycarbonate joint called Double Connector. Due to the multi-layer composition, it is an ideal product for the realization of translucent continuous facades characterized by high energy and structure performance. The use of both aluminum profiles with thermal break and the polycarbonate Double Connector allows the application of an anchoring system without penetration of arcoPlus® panel. Energy performance is thereby enhanced due to the exclusion of thermal bridges. LOAD RESISTANCE Maximum loads Values below refer to product installed according to the Technical Handbook Recommendation 4,50 distance between supports (m) Double or triple-layer system of UV protected multiwall polycarbonate for curtain walls WALL SECTION THERMAL INSULATION PRODUCT AVAILABLE WITH IR AND AR TREATMENT ACCESSORIES The arcoPlus®626 Double Connector system allows the realization of highperformance vertical curtain walls and translucent roofing. Easy installation Thermal insulation Light transmission The possibility to create various colors inside/outside Thermal bridge interruption APPLICATIONS BASE PROFILE DETAIL Removable base profile with thermal break Vertical windows SIDE PROFILE DETAIL Vertical glazing detail with the profile and thermal break a) Aluminum perimeter profile with thermal break, provided with sealing gaskets; b) Aluminum bracket for the anchorage to the supporting structure; c) Polycarbonate start and end profiles, and Double Connector for the connection between interior and exterior wall panels; d) Sealing of the cells using special tapes and aluminum block covers.

UV PROTECTION The exterior surface of the panel is coextruded with high-performance UV-absorbing polycarbonate to ensure excellent protection against ultra-violet rays, hail, and accidental impacts even after prolonged exposure to sunlight. The system includes a complete range of aluminum profiles for installing the panels. The air cells of the polycarbonate panels must be sealed using vented aluminum tape. This allows correct ventilation and prevents soiling on the inside. 2282 Double connector in polycarbonate 2179 Start profile in polycarbonate 4678/600 th.20mm Block cover AL 20 Reverso...