Cam action door closers in Contur Design

The universal closers for standard doors – Tested and approved to EN 1154 As units designed especially for interior applications, the TS 92 and TS 91 door closers constitute the perfect complement to the dormakaba TS 93 cam-action door closer system. They likewise come in the Contur design and, thanks to their linear drive mechanism with heart-shaped cam, they offer the same ease of use. Moreover, their competitive pricing combined with their outstanding level of assured quality make them particularly attractive from an economic standpoint as well. ≤  950 mm ≤ 1100 mm External doors, outward...

Chapter Title Section Title Standard and optional functions The closing speed of the TS 92 is individually adjustable over two independent ranges at two separate valves. The closing force setting (spring strength) for the relevant door width is adjusted with the TS 92 at an infinitely variable lateral adjustment screw. EN 1 1 Variable closing speed in the range 180°–15° 2 Variable latching speed in the range 15°–0° 3 Infinitely variable closing force 4 Hold-open (option) 5 Cushioned limit stay (option) TS 91 B The closing speed of the TS 91 is individually adjustable over two independent ranges...

TS 92 B Door leaf fixing, pull side (example shows LH [ISO 6] door; RH [ISO 5] doors mirrored arrangement) Provided the structural conditions allow, an opening angle of 180° is possible with this method of fixing. In most cases, however, a wall recess will have to be provided for the door closer. TS 92 B Transom fixing, push side (example shows LH [ISO 6] door; RH [ISO 5] doors mirrored arrangement) Depending on the structural conditions, the door opening angle with this method of fixing is limited to approx. 120° to 145°. In order to avoid damage to the door or door closer, users are recommended...

TS 92 G Door leaf fixing, push side (example shows LH [ISO 6] door; RH [ISO 5] doors mirrored arrangement) Depending on the structural conditions, the door opening angle with this method of fixing is limited to approx. 120° to 145°. In order to avoid damage to the door or door closer, users are recommended to install a cushioned backstay or a door stop. A door stop must be installed in the case of fire and smoke check doors. TS 92 G Transom fixing, pull side (example shows LH [ISO 6] door; RH [ISO 5] doors mirrored arrangement) Provided the structural conditions allow, an opening angle of 180°...

TS 91 B Door leaf fixing, pull side (example shows LH [ISO 6] door; RH [ISO 5] doors mirrored arrangement) Provided the structural conditions allow, an opening angle of 180° is possible with this method of fixing. In most cases, however, a wall recess will have to be provided for the door closer. TS 91 B Transom fixing, push side (example shows LH [ISO 6] door; RH [ISO 5] doors mirrored arrangement) Depending on the structural conditions, the door opening angle with this method of fixing is limited to approx. 120° to 145°. In order to avoid damage to the door or door closer, users are recommended...

Slide channel The G-N slide channel assembly comprises the main arm, slide channel, slide block, fixings, screws and end caps. The G-N slide channel is non-handed and can be combined with both door closers. Thanks to oblong holes in the fixing pads, it is possible to compensate for deviations in the drill hole pattern and to keep the door closer body and slide channel perfectly parallel. Hold-open unit The RF mechanical hold-open unit ensures that doors are held open at precisely the correct angle – up to approx. 150° – without any fallback. The hold-open unit can be switched on and off by the...

Mounting backplate for TS 91 For fixing to doors which provide no means of direct mounting. Fixing hole pattern as per Supplement 1 to EN 1154. Mounting backplate 40 mm for G-N For fixing the slide channel to the door frame where there is no means of direct mounting. Mounting backplate 30 mm for G-N For fixing the slide channel to the door frame where there is no means of direct mounting.

Angle bracket for G-N For push-side fixing of the slide channel to door frames with a deep reveal. Glass door saddle plate for TS 92 For fixing the closer to toughened glass doors – No glass drilling or recessing required.

Standard equipment and accessories TS 92 B Hold-open unit Cushioned limit stay set for G-N Angle bracket Glass door saddle plate for TS 92 Silver White (RAL 9016) Special colour TS 92 also available in matching “Design” finishes Stainless steel Polished brass * “Design” refers to the surface finish of the products xx Closer separate Slide channel assembly separate

Specification text TS 92 B/G Cam-action door closer, CERTIFIRE approved (CF 119), in Contur design with linear drive and rapidly decreasing opening resistance/torque, adjustable closing speed in two independent ranges and mounting backplate with universal fixing hole pattern; closing force infinitely variable between size EN 1 and EN 4. Non-handed. Approved to EN 1154. TS 91 B Cam-action door closer, CERTIFIRE approved (CF 119), in Contur design with linear drive and rapidly decreasing opening resistance/torque, adjustable closing speed in two independent ranges and mounting backplate with universal...

WN 053 126 51532, 12/16, TS 92/TS 91 Contur, GB, x. XXX. 01/18 Subject to change without notice dormakaba UK & Ireland E: [email protected] Wilbury Way, Hitchin Hertfordshire SG4 0AB T: +44(0)1462 477600 F: +44(0)1462 477601