FSW EASY Safe Technical Brochure 2017
16Pages

FSW EASY Safe Technical Brochure 2017 FSW EASY Safe FSW EASY Safe C / Cplus

FSW toughened glass folding walls featuring door rails top and bottom and a roller carrier at the end of each second panel. FSW folding sliding walls are suitable for linear configurations. With an FSW EASY Safe assembly, you can have either two or four panels (a basic panel and 1 or 3 folding panels) linked together. Where two counterrunning (bi-parting) assemblies are installed, it is possible to create frontages with up to eight FSW panels. As the panels are visually compatible with the HSW EASY Safe pivoting/sliding panels, and both systems use the same track design, shop/store...

System components Basic panel Folding panel The FSW EASY Safe assembly consists of the following basic components: 01 Track rail (fixed to the substructure) 02 Upper pivot bearing 03 Roller carrier 04 Upper locking bolt 05 Carrier profile Design without a carrier profile also available - see drawing below 06 Folding hinge 07 Top door rail 08 Bottom door rail consisting of basic profile and covers with lip seal 09 Toughened safety glass, or LSG of TSG (when using LSG we recommend the Clamp&Glue technology) 10 Floor pivot bearing 11 Face mounted slide bolt 01 Contact plate 02 Roller carrier...

Classification Product description 1a 2 panels left, as illustrated 1b 2 panels right, invers 1c 4 panels (2 panels left and 2 panels right), bi-parting 3a 6 panels left, as illustrated (4 panels left and 2 panels right) 3b 6 panels left, invers (2 panels left and 4 panels right) * Minimum structural clearance (e.g. balustrade, railings etc.)

Classification Product description 4a Pivoting end panel, single- or double action 2 panels left and 1 pivoting end panel, single- or double action, right (as illustrated) 2 panels right and 1 single- action or double-action end panel left (invers) Classification Product description Pivoting end panel, single- or double action 4 panels right and 1 pivoting end panel, single- or double action, right (as illustrated) 4 panels right and 1 pivoting end panel, single- or double action, left (invers) * Minimum structural clearance (e.g. balustrade, railings etc.)

FSW EASY Safe C / Cplus 9

Toughened glass folding partitions with door rails top and bottom roller carrier at panel centre The FSW EASY Safe C is adaptable to large spans. An assembly comprises a basic panel, up to 6 folding centre panels and a folding pivoting panel which, when the system is closed, can be used for access (alternatively, a non-attached single or double action end panel can be used). The number of panels therefore ranges between 3 and 8. As the roller carriers are centrally arranged on the folding panels, the basic panel must be designed as a half-width unit (plus pivot offset of 65 mm). The...

System componentsMagnetic door holders top Folding panel with bolt and bottom The FSW EASY Safe C system consists of the following basic components: 01 Track rail (fixed to the substructure) 02 Roller carrier 03 Carrier profile Top door rail also available in a design without the carrier profile -see drawing below. 04 Bottom door rail consisting of basic profile and covers with lip seal. 05 Magnetic holder top 06 Toughened safety glass, or LSG of TSG (when using LSG we recommend the Clamp&Glue technology) 07 Magnetic holder bottom End mounted slide bolt at the bottom in the area of the...

Layout variants Product description • 1 pivoting end panel, single-action, as access (here in narrow design for reasons of symmetry) • 1-6 folding panels • 1 basic panel (narrow) Product description • 1 pivoting access panel (here in narrow design for reasons of symmetry) • 1-6 folding panels • 1 basic panel

Product description • 1 basic panel (narrow) • 1-5 folding panels • 1 dual panel assembly Type C3, dual assembly (bi-parting) Product description Left: • 1 basic panel (narrow) • 1-5 folding panels • 1 dual panel assembly Right: • 1 basic panel (narrow) • 1-5 folding panels • 1 dual pan

Types and functions Access with convenience – the plus you get with the FSW EASY Safe Cplus Based on the design of the FSW EASY Safe Cplus, the model variant FSW EASY Safe Cplus offers the possibility of including a hinged, folding end panel as a fully fledged access door when the system is otherwise closed – with all the automatic closing convenience which the DORMA TS 93 G cam-action door closer can offer. The special bottom lock bolt and the top clamp-fitted stop serve to stabilize the first folding panel in this configuration. The top angle stop ensures the correct positioning of the...

FSW EASY Safe / Cplus Product description • 1 basic panel (narrow) • 1 – 5 folding panels • 1 dual panel assembly with TS93 G cam-action door closer easy open Type Cp2, dual assembly (bi-parting) Product description Left: • 1 basic panel (narrow) • 1 – 5 folding panels • 1 dual panel assembly with TS93 G cam-action door closer Right: • 1 basic panel (narrow) • 1 – 5 folding panels • 1 dual panel assembly with TS93 G cam-action door closer TS 93 technical data and features Spring strength/Door closer size Adjustable closing force Adjustable screw Adjustable screw Adjustable closing speed...

WN 05453551532, 07/17, GB, JP/XX, XX/17 Subject to change without notice dormakaba Deutschland GmbH DORMA Platz 1 58256 Ennepetal Germany