ED 100LE - ED 250LE
17Pages

ED100LE ED 250LE Low energy swing door operators

Automatic doors provide a means of opening and closing doors without the need for physical effort. For many people who lack physical ability or who are encumbered, by for example shopping or push chairs, heavy manual doors can be a barrier to access. With the ED 100LE / ED 250LE, dormakaba has developed a Low Energy swing door operator designed to remove this barrier and provide easy and safe access for all users. The unit offers a range of operating modes which enable the door to be opened under power when required and used as a conventional manual swing door at all other times. The ED...

Required operating conditions * Based on 70 mm pivot centres.

View: BASIC cover, pull-version, 12.5 mm drive arm pin Standard axle extension View: BASIC cover, push-version Standard axle extension View: CONTINUOUS cover, pull-version, 12.5 mm drive arm pin Standard axle extension

Drilling template: BASIC cover, pull-version, 12.5 mm drive arm pin 632 555 Centre of operator axle Upper edge of door leaf Standard axle extension Drilling template: BASIC cover, push-version 632 555 Centre of operator axl e Bottom edge of linte l 245 Standard axle extension Drilling template: CONTINUOUS cover, pull-version, 12.5 mm drive arm pin Centre of operator axle 15 5 Upper edge of door leaf Standard axle extension Cable entry on the left or on the right side.

View: CONTINUOUS cover, push-version 15 Standard axle extension View: BASIC cover, pull-version, 25 mm drive arm pin, pivoted door Door Pivot Standard axle extension View: BASIC cover, push-version, pivoted door Door Pivot Standard axle extension

Drilling template: CONTINUOUS cover, push-version Centre of operator axle 245 Bottom edge of lintel Standard axle extension Cable entry on the left or on the right side. Drilling template: BASIC cover, pull-version, 25 mm drive arm pin, pivoted door 632 555 Centre of operator axle Upper edge of door leaf Door Pivot Standard axle extension Drilling template: BASIC cover, push-version, pivoted door 632 555 Centre of operator axl e Bottom edge of linte l Door Pivot Standard axle extension

View: CONTINUOUS cover, pull-version, 12.5 mm drive arm pin, pivoted door B min. 1590 (based on 70mm Pivot Centres ) Standard axle extension View: CONTINUOUS cover, push-version, pivoted door B min. 1590 (based on 70mm Pivot Centres ) Standard axle extension

Drilling template: CONTINUOUS cover, pull-version, 12.5 mm drive arm pin, pivoted door Upper edge of door leaf Min. 1450 between Pivots Centre of operator axle Standard axle extension Cable entry on the left or on the right side. Drilling template: CONTINUOUS cover, push-version, pivoted door Door Pivot 245 Bottom edge of lintel Door Pivot Centre of operator axle Standard axle extension Cable entry on the left or on the right side.

ED 100LE / ED 250LE swing door operator 230 V The example system is equipped with all possible components. It is selected in accordance with the door-leaf width and the door-leaf weight. 1 Mains connection 5 Adjustment of closing force 9 Internal program switch 3 Axle connection on both sides 7 Switching power supply unit 8 User interface with 12 Complete cover (ED BASIC)* information display * supplied seperately Arm ED slide channel set – pull-version For lintel depths from 0 to 225 mm The slide channel set is suitable for doors The standard arm is suitable for lintel depths of with a...

Connections 1 Power supply 14 RM-ED smoke detector function: Emergency Off 3 Two-pole-and-earth socket 9 Radar motion detector, inside* 10 Remote actuation opposite hinge side 16 RM-N smoke detector, hinge side 17 Optional manual release continuous cover

Program switch PG-D3 4-position, lockable, aluminium, white, flush-mounted version, Gira S-Color EPS-D full-electronic program switch In System 55 design, 4-position, lockable via code or additional TL-ST S55 key switch, membrane keypad, aluminium-coloured, white, flush-mounted version ESR - Integrated door coordinator The ESR set is installed inside the double-leaf operator on site. It is available as an individual component and is easy to install. The system works similar to a drum brake and thereby ensures the proper functioning of the system. The brake is released when the passing leaf...

Framed 'F' type safety barriers BS EN 16005:2012 Power operated doorsets - Safety in use states: Barriers are intended to direct pedestrian traffic or to avoid pedestrians from entering non-safe zones. They shall be a) designed so that children cannot easily climb over or crawl under them, b) suitably secured, c) able to withstand forces occurring in normal service, d) a minimum of 900 mm high. Barriers, when used, shall not create new hazards. dormakaba offer the following range of barriers to ensure compliance. Framed 'F' type with glass infill. Silver painted aluminium frame. 10mm...

System setup Stop dormakaba infrared safety sensors are active infrared sensors and designed to detect all static and moving obstructions, either people or objects, within their detection range. On the opposite hinge side, the infrared safety sensor fulfils the function of an activator, which means that the sensor will institute the door to reverse and open as soon as an obstruction is detected in the course of a closing cycle. Then the hold-open time starts anew. On the hinge side, the infrared safety sensor will interrupt the automatic movement of the door whenever it detects an...

The Flatscan SW is a safety sensor based on laser technology to safeguard the swivel range of automated swing doors in accordance with DIN18650/EN16005. The sensors are installed in the upper corner area of the door. The resolution of the sensor is 70 measurement points for the swivel range and 100 measurement points for the secondary closing edge. A single sensor module on each side is sufficient to safeguard the entire door up to a diagonal of 4 m. The detection field of the sensor can be precisely adjusted so that the grey zone on the floor in which the detection is no longer possible...