Technical product brochure

Swing door operators with force balancing technology* With their ED 100 and ED 250, dormakaba offers electromechanical swing door operators for various fields of application. Simply select the suitable version according to your prevailing door-leaf width and weight: While the ED 100 is suitable for doors with a weight of up to 160 kg or a door width of 1,100 mm, the ED 250 is designed for doors with a width of 1,600 mm or a door weight of 400 kg. Benefits • Flexible configuration: Customers only pay for the functions they actually require. • Low-noise application due to multi-stage gear. • Elegant...

Swing door operator in modular design Required operating conditions * Depending on the door leaf weight, it is automatically limited in the low-energy operating mode according to EN 16005 or DIN 18650, BS 7036-4 and ANSI 156.19. Max. speeds are achieved only in the full-energy mode, with a low door panel weight and a taught opening angle of at least 95°. ** EN 7: lintel depth max. 125 mm

Mounting on hinge side, pull-version with slide channel, cover BASIC, standard axle extension Drilling template: pivot pin short 12.5 mm Drilling template: pivot pin long 25 mm Axle extension Standard 20 mm 30 mm 60 mm 90 mm1 Pivot pin 12.5 mm 25 mm

Mounting on hinge side, pull-version with CPD arm, cover BASIC, standard axle extension Swing door operator in modular design Drilling template: pivot pin short 12.5 mm Drilling template: pivot pin long 25 mm Axle extension Standard 20 mm 30 mm 60 mm 90 mm* Pivot pin 12.5 mm 25 mm

Mounting on opposite hinge side, push-version with slide channel, cover BASIC, standard axle extension Drilling template: pivot pin short 12.5 mm Drilling template: pivot pin long 25 mm Axle extension Standard 20 mm 30 mm 60 mm 90 mm1 Pivot pin 12.5 mm 25 mm

Swing door operator in modular design Mounting on opposite hinge side, push-version with arm, cover BASIC, standard axle extension Drilling template: arm EN 7 Center of operator axle -\ Axle extension Standard 20 mm 30 mm 60 mm 90 mm1

Mounting on hinge side, pull-version with slide channel, cover PROFESSIONAL, standard axle extension Drilling template: pivot pin short 12.5 mm Center of operator axle min. 1400 (1450 with ESR) Upper edge of door leaf The cable entry may be realized on the left or on the right side. Drilling template: pivot pin long 25 mm Center of operator axle min. 1400 (1450 with ESR) The cable entry may be realized on the left or on the right side. Axle extension A * only for ED 250 Upper edge of door leaf

Swing door operator in modular design Mounting on hinge side, pull-version with CPD arm, cover PROFESSIONAL, standard axle extension Drilling template: pivot pin short 12.5 mm Drilling template: pivot pin long 25 mm Axle extension Standard 20 mm 30 mm 60 mm 90 mm1 Pivot pin 12.5 mm 25 mm

Mounting on opposite hinge side, push-version with slide channel, cover PROFESSIONAL, standard axle extension Drilling template: pivot pin short 12.5 mm Drilling template: pivot pin long 25 mm Axle extension Standard 20 mm 30 mm 60 mm 90 mm1 Pivot pin 12.5 mm 25 mm

Swing door operator in modular design Mounting on opposite hinge side, push-version with arm, cover PROFESSIONAL, standard axle extension Center of operator axle min. 1400 (1450 with ESR) The cable entry may be realized on the left or on the right side. Bottom edge of lintel Center of operator axle The cable entry may be realized on the left or on the right side. Bottom edge of lintel

System setup The example system is equipped with all available components. It is selected in accordance with the door-leaf width and the door-leaf weight. 01 M ains switch 02 Mains connection 03 Connection unit 04 Axle connection on both sides 05 Operator system (motor/gear/spring) 06 Adjustment of closing force 07 Control unit 08 Switching power supply unit 09 Slot for dormakaba Upgrade Cards 10 User interface with information display 11 ED Cover Basic RM* 12 Internal program switch 13 Slide channel (set)* 14 Standard arm* 15 Slide channel CPD (set)* 16 Complete cover* 17 Cover BASIC RM* *supplied...

Way of mounting Lintel mounting on hinge side Lintel mounting on opposite hinge side with slide channel (pull-version) with standard arm (push-version)/ slide channel (push-version) FE = With Full-Energy or Fire Protection Upgrade Card, LE = Low-Energy standard operator without upgrade card * Power-Assist function is adjusted to maximum (function is activated at 0° opening width) ** The force is activated by an automatic opening in AUTOMATIC mode. *** By installing the push-version with slide channel, the forces are reduced by approx. 33% Door closer mode & AUTOMATIC mode Users may choose between...

Covers The covers are packed separately from the operator system, which makes it easy to select the respectively required cover. dormakaba provides covers for single and double systems. All covers are designed for on-site mounting. They are furthermore suitable for both the ED 100 and the ED 250 version. When creating double systems, the four-position internal program switch has to be replaced by a three-position switch, which means that the exit only function is only available in combination with the external program switch. Double-leaf systems are required for doors where the clearance between...

ED slide channel set Mounting version special color Mounting version special color Mounting version special color Mounting version special color The axle extensions 20, 30 and 60 mm are suitable for all arm versions of the ED 100 & ED 250. The axle extensions 90 mm is only suitable for all arm versions of the ED 250. The axle extensions are available in chromated black. Foils are available to cover the galvanised ED axle extensions. ED 100 and ED 250: For reveal depths +/– 30 mm ED slide channel set CPD ED 100 and ED 250: For reveal depths 30 - 60 mm ED standard arm 225 ED 100 and ED 250: For...

Upgrade Card Full-Energy - blue All operators are supplied as Low-Energy version, which means that the adjustable opening and closing speed range is restricted to a certain limit. The respective limits depend on the prevailing door-leaf width and door-leaf weight and may vary between 1° and 27° per second. These limits furthermore comply with DIN 18650 and EN 16005 (German Industrial Standard), ANSI 156.19 (American Standard) and BS 7036 (British Standard). Depending on their field of application, such swing door operator might not require safety sensors when operated in Low-Energy Mode. If you...