Field of application DOMOREFLECT COLOR ACRYL is applied on exterior surfaces as: - Old and new buildings - Traditional architecture buildings - Buildings near the sea - Northern walls - All building materials (mortar, concrete, brick, stone, ceramic, tile, plasterboard, etc.) Advantages - High resistance to weathering. - Excellent coverage and efficiency. - Vapor permeable. - Blocks adhesion of air pollutants (exhaust gases, industrial pollutants, acid deposition, salt etc.) on the paint, resulting to be flushed with the next rain. Thus the appearance of the building remains unchanged. - Eco-friendly. - Washable even with strong friction stress without any local tarnishing. Method of use Substrate condition: Clean the substrate of any loose pieces, as well as peeled off paints and oils. New surfaces require priming with DOMOREFLECT PRIMER, or in special cases (eg loose substrates) DOMORESIN SP mix with water, in a ratio DOMORESIN SP:WATER 1:4-6 w/w. Application: 1st & 2nd layer: DOMOREFLECT COLOR ACRYL diluted with water 5% v/v. Apply with a roll, brush or airless. Yield 9-11 m2/L per layer depending on the nature of the substrate. Storage Can be stored for at least 24 months from production date in the original pail, in a cool environment protected from frost and direct sunlight. Packaging Pails of 1 L, 3 L & 10 L. Colors Available in white and bases D (semi-transparent) and TR (transparent). Other colors available on request. Volatile Organic Compounds (VOC) EU REGULATION 2004/42: According to Directive 2004/42/EU (Annex II, Table A), the maximum allowed content of VOC (Product Category c / Type WB) is 40 g/L (limits of 2010) for the final product. The final DOMOREFLECT COLOR ACRYL contains max <40 g/L.

Specifications Form Specific weight Application temperature All the technical data stated in the present Technical Data Sheet are based on laboratory tests and the knowledge and experience of the company. Different conditions may apply at field applications that are beyond the control of the company. Therefore, the end user is ultimately responsible to make sure that the product is suitable for the application in question and to know the real conditions of the project. 30 th km Thessaloniki N. Moudania N.R. 63080, P.O. Box 306, Lakkoma,Chalkidiki, Greece T(+30)2399 020 320, F(+30)2399 020 323...