m B BB^^^^BB ■ B^^B l«-voc ip-mcir Description: DOMOREFLECT 122 MAX is a roof coating membrane based on a combination of solvent free high concentration aliphatic polyurethane and new generation nanomolecular hybrid resins. It stands out for its short drying time, enabling thus the applied surface to remain completely unaffected by upcoming rain and stagnant water, as well as its maximum dry film thickness. It creates a single membrane of exceptional whiteness which maintains its elasticity even in high temperature changes ensuring high resistance to ageing. Application fields DOMOREFLECT 122 Max may be applied on - Flat or inclined roofs - Parapets - Gutters, gypsum boards, etc. must be free of surface and rising moisture and of stagnant water. Apply DOMOREFLECT 122 Max diluted 10% by weight with water. In case of unstable substrates, it is recommended to prime the surface with epoxy primer Serital W Primer diluted 10% by weight with water. Advantages - Fast drying & walkability (250 m2 terrace waterproofing with primer application and 2 layers of DOMOREFLECT 122 Max, can be completed in one day, even with relative environmental humidity up to 80%) - Resistant to upcoming rain (1 hr 30 min from its application) and stagnant water - High dry film thickness ^ 0,75 mm - Finished surface remains tack free, so it does not collect dirt and dust - High whiteness & excellent reflectivity of solar radiation - Resistance to ageing ^ 10 years guarantee - Easy to apply - Excellent adhesion - Water vapor permeability - Fiber Reinforced - Crack bridging with or without the use of polyester reinforcement (geotextile). - Solvent-free, user friendly and environmentally friendly Method of Use Substrate preparation: Clean the substrate thoroughly from loose materials, peeled paints, dust and oils. The substrate Application: 2-3 layers of DOMOREFLECT 122 Max applied with roller, brush or airless. Each layer is applied crosswise to the previous one as soon as the previous layer is dry (depending on weather conditions). Maximum consumption for a wet layer is 1,4-1,5 kg/m2. Apply polyester fiber reinforcement over areas with cracks. In this case, apply primer and once dry, a layer of DOMOREFLECT 122 Max. Then place the reinforcement strip along the cracks as long as the material is still wet and finish with two more successive layers of DOMOREFLECT 122 Max. On surfaces with a lot of dense cracks, it is proposed to completely reinforce the surface with a polyester cloth of 60-70 gr/m2 or fiberglass of 225-300 gr/m2 and 1m width. Additionalnotes: - All application tools and accessories should be thoroughly cleaned with water immediately after use. - High temperatures accelerate and low temperatures slow down the drying process of the applied film. - Application temperatures from 5 ° C to 35 ° C. Do not

apply the product when rain or frost is imminent Consumption 150-250 gr/m2 as 1st layer diluted 10% by weight with water 1,3-1,5 kgr/m2 for 2 layers 1,7-2,0 kgr/m2 for 2-3 layers with reinforcement Storage At least 12 months from production date, stored in the original sealed pails under dry and cool conditions, protected from direct sun exposure and frost. Packaging Pails of 1 kg, 5 kg and 15 kg. Specifications Form Thick liquid Color White Final dry film thickness for 1 mm 0,75mm of liquid film and a consumption of 1,4 kg/m2 (EN ISO 2808) Dry-to-touch (23oC) (1 mm wet film thickness on glass)...

(**) 7 days at 70°C (***) 3 cycles of 24 hrs in water of 23°C and 24 hrs in 50°C for drying Artificial aging of Domoreflect 122 Max according to EN 1297 (exposure to UV radiation and humidity) _ All the technical data stated in the present Technical Data Sheet are based on laboratory tests and the knowledge and experience of the company. Different conditions may apply at field applications that are beyond the control of the company. Therefore, the end user is ultimately responsible to make sure that the product is suitable for the application in question and to know the real conditions of the...