DOMOREFLECT 102 Hybrid is a fiber, hybrid technology elastomeric coating for roof waterproofing. It offers excellent resistance to extreme variations in temperature, environmental pollution and UV radiation. It creates a fully waterproof, water vapor permeable membrane of high reflectivity which maintains a low temperature on the external surface during summer months. It is environmental friendly. Field of application DOMOREFLECT 102 Hybrid is suitable for application on: - Flat or inclined roofs - Hard to waterproof points and cracks using reinforcement mat - Vents, chimneys - All construction materials (mortar, concrete, brick, stone, roof tile, metallic surfaces, etc.) - Old waterproofing layers (acrylic, polyrethanic, etc.), provided that the surface has been cleaned mechanically - Roofs with installed equipment (solar panels, air conditions. etc.) Advantages - Creates an impermeable waterproofing membrane with resistance to stagnant water. - Water vapor permeable, allows transpiration of the substrate. - High resistance to temperature fluctuations (-30oC to +90oC). - Resistant to UV rays. - Highly reflective. - Easy to apply also on tough spots (corners, joints, cracks, etc.). - Excellent adhesion to the substrate. - Elastic, bridges hair cracks. - Can be applied also on uneven substrate. - Excellent coverage and whiteness. - Easy to clean, does not retain dust or dirt. Method of use Substrate condition: Clean the substrate from any loose pieces, as well as peeled off paints and oils. The substrate must be free of moisture and standing water. Prime with acrylic water-based DOMOREFLECT PRIMER or with DOMOREFLECT 102 Hybrid diluted 10-15% w/w with water depending on the nature of the substrate. In case of particularly loose substrates, prime the surface with DOMORESIN diluted with water at a ratio of 1 to 3. Application: 2-3 layers: DOMOREFLECT 102 Hybrid undiluted. Apply with a roll, brush or airless. Each layer is applied crosswise, after the previous has been fully dried (after 2,5-3 hours depending on the ambient temperature). In places with cracks apply polyester cloth tape as reinforcement. In this case, apply the primer and when it is fully dry spread one layer of DOMOREFLECT 102 Hybrid. Then apply the reinforcement tape along the cracks, while the material is still wet and then apply another two successive layers of DOMOREFLECT 102 Hybrid. On surfaces with many and dense cracks, it is recommended to fully reinforce the surface using polyester cloth in a width of 1 m and weight of 60 gr/m2. Additional information: - All tools and application equipment must be cleaned thoroughly and immediately after their use with plenty of water.

The polymerization of the applied membrane is accelerated by high temperatures and slowed down by low temperatures. The application temperature is +5°C to 35°C. Do not apply when rain or frost is expected in the following two days. Specifications Form Liquid Shading White Consumption 200-300 g/m2 as primer. 1,3-1,5 kg/m2 for 2 layers on primed surfaces depending on the nature of the substrate. Storage Can be stored for at least 12 months from production date in the original pail, in a cool environment protected from frost and direct sunlight. Packaging Pails of 1 kg, 5 kg & 15 kg. Colors White....