Technical data sheet PARASILICO AM85-1 CHARACTERISTICS • Neutral oxime curing, 1-component weatherseal silicone sealant • Very easy to apply • Permanent elasticity • Excellent adhesion to almost all building materials • High resistance to UV • High resistance to ageing and weather conditions • MEKO-free APPLICATIONS • Sealing of glazing joints. • Sealing of connection and expansion joints in facades, interior walls, between frame and wall, etc. • Sealing of connection joints in building and construction. 25 x cartridge 300ML/box - 1200 pieces/pallet RAL9016 Traffic white, RAL9010 Pure white, RAL9003 Signal white, RAL9001 Cream white, RAL1015 Light ivory, Ton pierre, Bahama beige, Beige, RAL1019 Grey beige, RAL8007 Fawn brown, RAL8003 Loam brown, RAL8014 Sepia brown, RAL8016 Mahogany brown, RAL8017 Chocolate brown, Bronze, RAL8019 Grey brown, Light manhattan, RAL7023 Concrete grey, RAL7038 Agate grey, RAL7033 Cement grey, RAL7035 Light grey, RAL7004 Signal grey, RAL7011 Iron grey, RAL7032 Pebble grey, RAL7039 Quartz grey, RAL7015 Slate grey, RAL7022 Umber grey, RAL7005 Mouse grey, RAL7037 Dust grey, RAL7030 Stone grey, RAL7024 Graphite grey, RAL7016 Anthracite grey, RAL7012 Basalt grey, RAL7021 Blackish grey, RAL9011 Graphite black, RAL1013 Pearl white, RAL8028 Terra brown 20 x foil bag 600ML/box - 900 pieces/pallet RAL9010 Pure white, RAL7004 Signal grey, RAL9011 Graphite black This technical data sheet replaces all previous editions. The data on this sheet have been compiled according to the last laboratory report. Technical characteristics can be changed or adapted. We are not responsible for any incomplete information. Before use, one needs to ensure that the product is suitable for his application. Therefore, tests are necessary. Our general conditions apply

25 x foil bag 400ML/box - 1200 pieces/pallet RAL9010 Pure white The surfaces must be solid, dry and free of dust and grease. If needed degrease the materials to be glued with Parasilico Cleaner, MEK, fire alcohol, ethanol. Use in well-ventilated rooms. Good ventilation is important during application and curing of the product. The user needs to make sure that the product is suitable for the application. Consult our technical service if necessary. Absorbent surfaces: Silicone Primer Porous Surfaces (transparent, drying time about 60 min.). Non-absorbent surfaces: Silicone Primer Non-Porous Surfaces...

• Not suitable for mirrors. • Not suitable for use on butiminous surfaces. • Not suitable for use on PE,PA,PP,PTFE (Teflon). • Not suitable for use on polyacrylate and polycarbonate • Not suitable for use on natural stone (can cause stains). • Colours can yellow slightly in the absence of UV light or through contact with smoke or detergents. • Not paintable. • Not suitable for sanitary applications (not mould resistant) • Not suitable for contact with edge sealing of insulating glazing. Avoid direct contact. • Not suitable for contact with PVB films of laminated glass. Avoid direct contact. TECHNICAL...