Technical data sheet PARASILICO ALCOXY 15 CHARACTERISTICS • High quality neutral alcoxy curing, 1-component silicone sealant • Permanent elasticity • High resistance to high and low temperatures • Excellent adhesion to almost all building materials • Compatible with most edge seals of insulating glazing and PVB films of security glass • High resistance to UV • Low odour • Low elasticity modulus • Very easy to pump and to apply, also at lower temperatures • High resistance to ageing and weather conditions • EC1 Plus label: very low VOC emissions • The rapid skin formation time reduces the risk of sealant contamination APPLICATIONS • Sealing of glazing joints. • Perimeter joints around window frames. • Sealing of connection joints in building and construction. • Extremely suitable for expansion joints. 25 x foil bag 400ML/box - 1200 pieces/pallet RAL9016 Traffic white 25 x cartridge 300ML/box - 1200 pieces/pallet RAL9016 Traffic white, Black, RAL7004 Signal grey, RAL7016 Anthracite grey, RAL8028 Terra brown, RAL9003 Signal white, RAL9010 Pure white, RAL7035 Light grey, RAL7021 Blackish grey, RAL7022 Umber grey, RAL8014 Sepia brown, RAL1015 Light ivory, RAL8003 Loam brown This technical data sheet replaces all previous editions. The data on this sheet have been compiled according to the last laboratory report. Technical characteristics can be changed or adapted. We are not responsible for any incomplete information. Before use, one needs to ensure that the product is suitable for his application. Therefore, tests are necessary. Our general conditions apply

Preparation • The surfaces must be solid, dry and free of dust and grease. • If needed degrease the materials to be glued with Parasilico Cleaner, MEK, fire alcohol, ethanol. • Use in well-ventilated rooms. Good ventilation is important during application and curing of the product. • It is recommended to carry out tests on every surface before use. • The user needs to make sure that the product is suitable for the application. Consult our technical service if necessary. Primers • Absorbent surfaces: Silicone Primer Porous Surfaces (transparent, drying time about 60 min.). • Non-absorbent surfaces:...

Not suitable for use on PE,PA,PP,PTFE (Teflon). Not suitable for use on polyacrylate and polycarbonate Not suitable for use on natural stone (can cause stains). Colours can yellow slightly in the absence of UV light or through contact with smoke or detergents. Not paintable. Not suitable for sanitary applications (not mould resistant) Compatible with most edge seals and PVB films of laminated glass. However, due to the large number of systems on the market and because the composition of it can be changed, this does not guarantee compatibility on all glazing sealants. TECHNICAL APPROVALS • • • •...