Technical data sheet PARAROOF SUPER CHARACTERISTICS • Joint and adhesive sealant • Excellent adhesion to almost all building materials • Permanent elasticity • High resistance to ageing and weather conditions • High resistance to UV • Adheres to slightly damp surfaces • Excellent flexibility • Adhesive sealant • Also adheres under water APPLICATIONS • Waterproof finishing of complex roof details such as domes, upstands, skylights, chimneys, ventilation pipes, gutters, etc. • Plugging cracks, fissures and blisters in roofs and gutters. • Sealing leaks and emergency repairs during rainy weather. • Bonding to bituminous surfaces, roofing, roof rolls, tiles, insulation boards, etc. • Waterproof sealing of joints, seams, and roof edge closures 12 x cartridge 300ML/box - 1200 pieces/pallet Black METHOD OF USE Preparation • The surface must be solid, strong enough and clean, dust and fat-free. The surface doesn't need to be totally dry (earth-moist). • If needed degrease the materials to be glued with Parasilico Cleaner, MEK, fire alcohol, ethanol. • Use in well-ventilated rooms. Good ventilation is important during application and curing of the product. • It is recommended to carry out tests on every surface before use. • The user needs to make sure that the product is suitable for the application. Consult our technical service if necessary. Application This technical data sheet replaces all previous editions. The data on this sheet have been compiled according to the last laboratory report. Technical characteristics can be changed or adapted. We are not responsible for any incomplete information. Before use, one needs to ensure that the product is suitable for his application. Therefore, tests are necessary. Our general conditions apply DL Chemicals nv Roterijstraat 201-203 - Zone 5 Snepbeek - 8793 Waregem - Belgium T +32 56 62 70 51 - F +32 56 60 95 68 [email protected] - www.dl-chem.com Last Upd

Apply the product from the cartridge or foil packaging with a manual or pneumatic caulking gun After application, there is almost immediately sufficient adhesive strength to withstand a small load. Maximum adhesive strength after complete drying. Clean tools with white spirit. SAFETY Consult the safety information on the packaging and the safety data sheet for more information. LIMITATIONS • • • • Not suitable for use on natural stone (can cause stains). Not suitable for use on EPDM. Not appropriate for use on polystyrene (XPS, EPS). Not suitable for use on insulation boards that are not resistant...