PARACOL WOOD D3

Product catalog summary

Product Overview:
PARACOL WOOD D3 is a one-component, white wood glue that becomes crystal clear after curing. It offers extremely high bonding capacity and high water resistance, making it suitable for various types of wood, including problematic ones like beech, maple, and bamboo.

Applications:
The glue is suitable for most common and exotic woods. It conforms to resistance groups D3 according to DIN 68602 when applied on both sides and exposed to air for approximately 3 minutes. Special conditions apply for bleeding woods due to tannins and resins.

Technical Characteristics:

Consistency: Pasta
Application Temperature: > +5°C
Temperature Resistance: -20°C to +70°C
Density: 1.09 g/ml
pH: 3
Minimum Film Forming Temperature: ± 5°C
Dry Matter Content: ±52%
Tensile Strength: 3.3 N/mm² after 5 min, 6.2 N/mm² after 15 min, 7.2 N/mm² after 30 min
D3 Norm Tensile Strength: 15 N/mm² after 7 days, 3 N/mm² after immersion
Viscosity: 11,000 mPa.s
Shelf Life: 12 months
Storage: Store in a dry, cool place at +5°C to +25°C, away from direct sunlight.

Packaging:
Available in various sizes including 5kg buckets, 250GR and 750GR flacons, and 25kg buckets.

Method of Use:

Preparation: Ensure surfaces are solid, dry, and free of dust and grease. Degrease if necessary and perform adhesion tests for bleeding wood.
Application: Apply on one or both sides for high water resistance. Let dry for about 5 minutes, then compress parts for 10-20 minutes.
Consumption: 150-200 g/m²
Cleaning: Use water to remove uncured residues.

Safety and Attention Points:
Consult safety information on packaging. Unpredictable discoloration may occur on certain woods. Do not dilute the product.

Technical Approvals:
French VOC emission class A+

Catalog excerpts

Technical data sheet PARACOL WOOD D3 CHARACTERISTICS • One-component, white wood glue • Crystal clear after curing • Crystal clear • Extremely high bonding capacity • High water resistance APPLICATIONS • Suitable for the most common types of wood and particularly suitable for problematic woods such as beech, maple and bamboo. • Bonding conform to the resistance groups D3 according to DIN 68602, when the glue is applied on both sides and when the glue is exposed to the air during a short period of time (± 3 minutes). • Can be used on most kinds of wood, even exotic. • Can be used on bleeding wood if a number of conditions are respected because of the risk of bleeding of tannins and resins. bucket 5kg - 60 pieces/pallet 12 x flacon 250GR/box - 672 pieces/pallet 12 x flacon 750GR/box - 480 pieces/pallet bucket 25kg - 12 pieces/pallet bucket 10kg - 27 pieces/pallet This technical data sheet replaces all previous editions. The data on this sheet have been compiled according to the last laboratory report. Technical characteristics can be changed or adapted. We are not responsible for any incomplete information. Before use, one needs to ensure that the product is suitable for his application. Therefore, tests are necessary. Our general conditions apply DL CHEMICALS I Manufacturer of Sealants

Open the catalog to page 1

The surfaces must be solid, dry and free of dust and grease. If needed degrease the materials to be glued with Parasilico Cleaner, MEK, ﬁre alcohol, ethanol. The user needs to make sure that the product is suitable for the application. Consult our technical service if necessary. In the case of bleeding wood: sand the wood just before gluing and perform an adhesion test. All parts should mate well and must be free from dust and grease. If the parts do not ﬁt, the setting time will be longer and the bond strength will be lower. The joints should be processed shortly before bonding. Stir the product...

Open the catalog to page 2

PARACOL WOOD D3

PARACOL WOOD D3

Catalog excerpts

All DL Chemicals catalogs and technical brochures