PARACOL UNIVERSAL FLOORING

Product catalog summary

Overview: This technical data sheet provides detailed information about the Paracol Universal Flooring adhesive, a water-based, solvent-free glue suitable for various flooring applications. It is designed for easy application and is non-flammable, making it safe for users.

Characteristics:

Easy to apply, one-component glue.
Adheres quickly and powerfully, even to impermeable surfaces.
Peel resistant and non-harmful to health.

Applications:

Suitable for bonding parquet on floors with underfloor heating.
Effective on both absorbent and non-absorbent surfaces.
Ideal for bonding various floor coverings including LVT, VCT, PVC, linoleum, carpet, and cork.
For indoor use only.

Technical Characteristics:

Type: Acrylic dispersion
Consistency: Pasta
Application Temperature: +15°C to +35°C
Density: 1.24 g/ml
Walkable after 24 hours; fully deployable after 72 hours.
Shelf life: 15 months when unopened.
Storage: Store in a dry, cool place between +5°C and +25°C.

Method of Use:

Preparation: Ensure surfaces are dry, clean, and free from dust. Use DL Egaline Primer and egalisation layer for non-absorbent surfaces.
Application on Absorbent Surfaces: Use the semi-wet bonding method, applying adhesive evenly and placing the floor covering after 20 minutes.
Application on Non-Absorbent Surfaces: Use the contact bonding method, allowing the adhesive to vent before placing the floor covering.

Consumption:

Solid back: ~240 g/m²
Uneven back: ~285 g/m²
Rough back: ~350 g/m²

Cleaning: Tools and surfaces can be cleaned with water before curing.

Safety: Refer to safety information on packaging and safety data sheet.

Points of Attention: Avoid applying on surfaces not protected against rising moisture. Application times vary with temperature and humidity.

Technical Approvals:

GEV Emicode EC1plus label: Very low VOC emissions.
French VOC emission class A+.

Catalog excerpts

Technical data sheet PARACOL UNIVERSAL FLOORING CHARACTERISTICS • Very easy to apply • One component glue • Water-based • Solvent free • Adheres powerfully and quickly, also to impermeable floor coverings • Peel resistant • Does not harm (end) user's health • Non-flammable APPLICATIONS • Suitable for bonding parquet on floors with underfloor heating. • For both absorbent and non-absorbent surfaces. • Bonding of horizontal flexible floor coverings. • Bonding of LVT (luxury vinyl tiles) and VCT (semi-hard vinyl floor tiles), homogeneous and heterogeneous PVC floor coverings in bands, linoleum, carpet, cork. • Bonding of ABS. • Suitable for indoor use only. bucket 14kg - 33 pieces/pallet White This technical data sheet replaces all previous editions. The data on this sheet have been compiled according to the last laboratory report. Technical characteristics can be changed or adapted. We are not responsible for any incomplete information. Before use, one needs to ensure that the product is suitable for his application. Therefore, tests are necessary. Our general conditions apply DL CHEMICALS I Manufacturer of Sealants

Open the catalog to page 1

Application On absorbent surfaces: the semi-wet bonding method • Apply the adhesive evenly on the surface using a suitable glue comb. Do not spread more adhesive than can • • be applied within the open time (40 minutes). Place the ﬂoor covering after a short wait of 20 minutes. If the adhesive bead has dried superﬁcially, then the tack is not still minute. After application, rub on the ﬂoor covering to ensure proper full-surface distribution of the adhesive on the back and that no air is trapped under the ﬂoor covering. Aggravate or counter roll front sides, uneven seams and possible deformations...

Open the catalog to page 2

PARACOL UNIVERSAL FLOORING

PARACOL UNIVERSAL FLOORING

Catalog excerpts

All DL Chemicals catalogs and technical brochures