Technical data sheet PARABOND PARQUET 240 CHARACTERISTICS • 1-component parquet adhesive • Very easy to apply • Permanent elasticity • Low odour • Phthalate free • Ready-to-use • High end strength • Solvent, water, isocyanate and phthalate free • Suitable for use with underfloor heating • Better acoustic comfort • Excellent stance (adhesive lines remain stable) APPLICATIONS • Suitable for bonding parquet on floors with underfloor heating. • For both absorbent and non-absorbent surfaces. • Bonding of ABS. • Suitable for all sizes of multilayer parquet flooring (or composite parquet) that complies with the EN 13489 standard, chipboard, OSB and plywood. • Suitable for anhydrite screed floors. bucket 15kg - 33 pieces/pallet Beige_ This technical data sheet replaces all previous editions. The data on this sheet have been compiled according to the last laboratory report. Technical characteristics can be changed or adapted. We are not responsible for any incomplete information. Before use, one needs to ensure that the product is suitable for his application. Therefore, tests are necessary. Our general conditions apply DL Chemicals nv Roterijstraat 201-203 - Zone 5 Snepbeek - 8793 Waregem - Belgium T +32 56 62 70 51 - F +32 56 60 95 68 [email protected] - www.dl-chem.com Last Update

Preparation • Apply a primer if necessary. • Use in well-ventilated rooms. Good ventilation is important during application and curing of the product. • It is recommended to carry out tests on every surface before use. • The user needs to make sure that the product is suitable for the application. Consult our technical service if necessary. • Remove irregularities such as old adhesive residues mechanically • Preferably roughen/sand smooth surfaces to increase the contact surface. • Uneven floors should be levelled first using a levelling layer like DL Egaline of DL Maxi Egaline. • Any cracks...

Any adhesive that may protrude along the edges can be removed using a stopping knife. Adhesive residue that has not yet dried, can be removed using Parasilico Cleaner, Multi-Purpose Super Cleaner or Cleaning Wipes.. SAFETY Consult the safety information on the packaging and the safety data sheet for more information. LIMITATIONS • • • • • • Not suitable for permanent submersion. Not suitable for use on butiminous surfaces. Not suitable for use on PE,PA,PP,PTFE (Teflon). Avoid contact with plasticizer-containing materials such as bitumen, neoprene, EPDM, butyl... as these can lead to loss of adhesion...