Technical data sheet PARABOND LOW MODULUS CHARACTERISTICS • Joint sealant • Very easy to apply • Permanent elasticity • High resistance to UV • Can be applied to dry and slightly damp surfaces • Solvent, isocyanate and phthalate free • Paintable with most water and solvent based paints • Low elasticity modulus • High resistance to ageing and weather conditions APPLICATIONS • Sealing of connection and expansion joints in facades, interior walls, between frame and wall, etc. • Sound proofing between concrete and drain pipes. • Sealing of applications where the sealant requires a lower strength than the substrate, such as autoclaved aerated concrete (eg. Ytong stones). • Sealing of prefab concrete elements and bricks. • Indoor and outdoor use. 25 x cartridge 290ML/box - 1200 pieces/pallet White This technical data sheet replaces all previous editions. The data on this sheet have been compiled according to the last laboratory report. Technical characteristics can be changed or adapted. We are not responsible for any incomplete information. Before use, one needs to ensure that the product is suitable for his application. Therefore, tests are necessary. Our general conditions apply

Preparation • The surface must be solid, strong enough and clean, dust and fat-free. The surface doesn't need to be totally dry. • If needed degrease the materials to be glued with Parasilico Cleaner, MEK, fire alcohol, ethanol. • Use in well-ventilated rooms. Good ventilation is important during application and curing of the product. • The user needs to make sure that the product is suitable for the application. Consult our technical service if necessary. Primers • On highly absorbent surfaces we recommend to use the Hybrid & PU Primer (transparent or black, drying time about 15 min.). Application...

SAFETY Consult the safety information on the packaging and the safety data sheet for more information. Not suitable for permanent submersion. Not suitable for use on butiminous surfaces. Not suitable for use on PE,PA,PP,PTFE (Teflon). Not suitable for use on polyacrylate and polycarbonate Colours can yellow slightly in the absence of UV light or through contact with smoke or detergents. Not suitable for sanitary applications (not mould resistant) Not suitable for glazing joints. Not suitable for contact with edge sealing of insulating glazing. Avoid direct contact. Not suitable for contact with...