230 V telescopic automation for swing gates with wing up to 3.5 m

Ditec TS 35 Ditec TS 35 is the irreversible telescopic operator for swing gates for frequent use and residential applications. Motor release mechanism for opening or closing the gate manually in the event of a power outage Sturdy die-cast aluminium casings protecting the steel screw and the steel and bronze gears Example of installation Flashing light Wall-mounted photocell Automation Column-mounted photocell Electronic control panel Key-operated selector switch Wall-mounted photocell Automation Column-mounted photocell Remote control FULLY COMPLIANT WITH EUROPEAN DIRECTIVES AND STANDARDS 2014/30/EU...

RELIABLE AND STURDY Quick to install, in just three simple steps: with the gate closed, fix the motor onto the pillar using the pre-drilled bracket plate, extend the telescopic arm and fasten it to the gate wing. the use of stainless steel for the motor shaft, gears and screw ensures superior durability ball bearings for smooth operation and powerful motor guarantees high thrust force configurable deceleration settings for both opening and closing cycles the pre-drilled brackets are thicker than competitors to withstand more effectively the torsional and shear forces © The KITs that make the...

TECHNICAL SPECIFICATIONS DESCRIPTION Electromechanical actuator Maximum load TS35ACD-TS35ACS* * TS35ACD: right motor TS35ACS: left motor Motor power feed Max power Max absorption Max thrust Opening speed Maximum stroke Actuator maximum opening Intermittent operation Service class Release system for manual opening Operating temperature Protection rating Weight (kg) Control panel irreversible 400 kg x 1.5 m 300 kg x 3.5 m 230 Vac - 50 Hz 330 W 1.5 A 3500 N 18 s - 22 s / 90° 400 mm 110° S2 = 10 min / S3 = 30% frequent, up to 100,000 cycles key-operated -20°C / + 55°C in standard conditions (-35°C...