Disegna Walling Technical Data
Disegna Walling Technical Data
The ventilated facade system measures 18.5 x 172 x 2800mm. Key technical specifications include:
- Apparent Density: 945 kg/m3 with a standard deviation of 5, as per UNE EN 323.
- Density: 1200 kg/m3 with a standard deviation of 5, as per UNE EN 323.
- Resistance to Bending: Longitudinal resistance is 34.6 N/mm2 with a standard deviation of 0.3, according to UNE EN 310.
- Module of Elasticity: Longitudinal module is 3720 N/mm2 with a standard deviation of 18, as per UNE EN 310.
- Swelling and Absorption: After 24 hours of water immersion, swelling is 0.28% and absorption is 2.29%, both measured according to UNE EN 317.
- Impact Resistance: Classified as Class IC3 under UNE EN 13329.
- Connector Strength: Screws on board (19mm) have a strength of 16.1 N/mm2 and screws on solid part (4mm) have a strength of 40.4 N/mm2, as per UNE EN 13449.
- Thermal Properties: Linear thermal contraction is 2.3 mm/m with a standard deviation of 0.5, and the expansion coefficient is 0.0164 mm/m°C with a standard deviation of 0.0017, according to UNE CEN TS 15534.
Tests were conducted by AIDIMA, an ENAC-accredited laboratory in Spain.
DISEGNA WALLING is a brand under the Condepols® group, which has over 40 years of experience in developing and manufacturing polymer products. The group operates in over 60 countries, focusing on high-value, environmentally sustainable products.
Catalog excerpts
TECHNICAL INFORMATION VENTILATED FACADE SYSTEM Measures 18,5 x 172 x 2800mm STANDARD DEVIATION Resistance to bending (N/mm2) · Longitudinal Module of elasticity (N/mm2) · Longitudinal Swelling of thickness after immersion in water 24 hours (%) Absorption of thickness after immersion in water 24 hours(%) Resistance to impact · Ball large diameter (mm) · Ball small diameter (N) Conectors star. Screws on board 19mm. (N/mm2). Start face Conectors star. Screws on solid part 4mm. (N/mm2) Linear thermal contraction (mm/m) TechInfo V2 Test realizados por AIDIMA, laboratorios acreditado por ENAC en España. www.aidima.es www.aimplas.es www.enac.es DISEGNA WALLING is a brand of the Condepols® group. A group of companies with over 40 years experience developing and manufacturing polymer products. Condepols® sell their products in over 60 countries and are focused on developing and manufacturing products with a high added value while remaining environmentally sustain
Open the catalog to page 1All Disegna catalogs and technical brochures
Walling brochure6 Pages
Decking Technical Data1 Page
Decking Brochure6 Pages
- Rainscreen cladding
- Panel rainscreen cladding
- Smooth rainscreen cladding
- Gray cassetta
- Sustainable rainscreen cladding
- Vertical cladding
- Ventilated facade rainscreen cladding
- Decking
- Brown cassetta
- White cassetta
- Strip cladding
- Beige cassetta
- Black cassetta
- Commercial decking
- Wooden cladding
- Wood look cladding
- Red cassetta
- Wood look decking
- Sustainable decking
- Green cladding