Dinesen Pine 35 mm
6Pages

Product sheet Dinesen Pine 35 mm Dinesen Pine is our oldest collection of solid plank floors and characterized by the same high quality that Dinesen is known for. A Dinesen Pine floor offers you all the natural properties of a solid plank floor.

Product sheet - Pine 35 mm Dinesen Pine The quality of Dinesen Pine is three-fold: the wood, the handcraftsmanship and the Dinesen know-how. For more than 120 years, Dinesen has been driven by the passion to recreate the natural calm of the forest in the meeting between people and nature. Dinesen Pine is the result of craftsmanship and high-quality wood – bringing nature closer. The high-quality raw wood is sourced from European forests where forestry has been based on sustainable principles for centuries. Every single plank is checked repeatedly throughout the Dinesen production process in...

Product sheet - Pine 35 mm Product description Pine planks create a highly elegant and harmonious expression due to the extraordinary dimensions. An extravagant solution with clear references to the majestic Pine tree. Tonque & groove Dimension sketch Random lengths Dinesen Pine in random lengths, 35 mm, comes in widths from 150 - 300 mm and in lengths up to 7 m. For planks in random lengths, you can expect an average length in the middle of the interval with some short and long planks as well. This makes for a fluid transition from one room to the next and a coherent expression that is...

Product sheet - Pine 35 mm At Dinesen we view the installation as one of the most important parameters for a successful outcome. Wood is a hygroscopic material that absorbs and emits humidity from the environment, meaning that it will always adapt to an equilibrium level of humidity, determined by the temperature and relative humidity of the air. This makes correct installation essential. There are three different installation methods: “Screwed from above”, “Hidden screws” and “Full-surface gluing”. No installation is inherently optimal in every situation, and the right choice will vary...

Product sheet - Pine 35 mm Product data og tolerances Description Random lengths Full lengths Width Thickness Right-angled Wood moisture content Tonque Finish front Finish back Surface treatment The planks are made of European Pine (mainly felled in Schwarzwald) 2 - 5 m in random lengths 5 - 7 m in random lengths Up to 15 m (200 - 300 mm) (See list of cuts, page 3) 150, 200, 250 & 300 mm. Tolerance: +/- 1,0 mm 35 mm. Tolerance: +/- 0,5 mm 90 degrees +/- 0,1° degree 8 - 10 % 7,8 mm Sanded, grit 100 (treated according to Dinesen instruction “After installation”) Planed (may occur areas where...

Product sheet - Pine 35 mm General About the planks The planks are supplied unfinished and have a moisture content of 8-10 %. Dinesen floor planks are CE-labelled in accordance with EN 14342. Delivery times Delivery times vary and may in some cases be considerable. For more information on delivery time, please contact Dinesen on +45 7455 2140. Storage If the floor planks are stored for a short period of time, they must be kept inside in a sealed, dry and warm room. Place the floor planks on joists and wrap them tightly in plastic - also underneath. Installation Always consult our...