Dinesen Layers Oak
5Pages

Product sheet Dinesen Layers Oak Dinesen Layers is a new selection of engineered floor planks based on the high quality that characterises Dinesen plank floors. A Dinesen Layers floor provides you with all the natural qualities of a wood floor in an engineered solution.

Product sheet - Layers Oak Dinesen Layers Oak The quality of Dinesen Layers is three-fold: the wood, the handcraftsmanship and the Dinesen know-how. sourced from European forests where forestry has been based on sustainable principles for centuries. For more than 120 years, Dinesen has been driven by the passion to recreate the natural calm of the forest in the meeting between people and nature. Dinesen Layers Oak is the result of craftsmanship and high-quality wood – bringing nature closer. The high-quality raw wood is Every single plank is checked repeatedly throughout the Dinesen...

Product sheet - Layers Oak Product description Dinesen Layers Oak distinguishes itself from other lamella constructed floors as it consists of three quality layers that are pressed together with a reverse middle layer - all in European Oak. An elegant and subtle solution. 5 mm (16’ 4”) 300 mm (11.8”) Top layer Middle layer Bottom layer 6 mm (16’ 5”) Dimension sketch Finger joined lamellas Longitudinal section view Cross-sectional view A variant where the middle and bottom layers consist of finger-assembled off cut wood from our own production, which ensures optimal utilization of the raw...

Product sheet - Layers Oak Product data and tolerancesDescription Length Right-angled Glue Wood moisture content Tongue and groove Surface treatment Three-layer engineered floor plank All three layers consist of European oak The top lamella is 6 mm thick and defines the wear layer 2 - 3 m (6' 7'' - 9' 8'') in random lengths 2 - 5 m (6' 7'' - 16' 5'') in random lengths The majority will be ~3500 mm (11' 6”) 300 mm (~12”) Tolerance: +/- 0.3 mm (0.01”) 19 mm (3/4”) Tolerance: +/- 0.2 mm (0.008”) 90 degrees +/- 0,1° degree Waterproof and formaldehyde-free 5 - 7 % 6 mm (~1/4”) Unfinished. To be...

Product sheet - Layers Oak General About the planks The planks are supplied unfinished and have a moisture content of 5-7 %. Dinesen floor planks are CE-labelled in accordance with EN 14342. Delivery times Delivery times vary and may in some cases be considerable. For more information on delivery time, please contact Dinesen on +45 7455 2140. Storage If the floor planks are stored for a short period of time, they must be kept inside in a sealed, dry and warm room. Place the floor planks on joists and wrap them tightly in plastic - also underneath. Installation Always consult our...