Product sheet Dinesen Ash 22 mm Dinesen Ash is our oldest collection of solid plank floors and characterized by the same high quality that Dinesen is known for. A Dinesen Ash floor offers you all the natural properties of a solid plank floor.

Dinesen Ash The quality of Dinesen Ash is three-fold: the wood, the handcraftsmanship and the Dinesen know-how. For more than 120 years, Dinesen has been driven by the passion to recreate the natural calm of the forest in the meeting between people and nature. Dinesen Ash is the result of craftsmanship and high-quality wood – bringing nature closer. The high-quality raw wood is sourced from European forests where forestry has been based on sustainable principles for centuries. Every single plank is checked repeatedly throughout the Dinesen production process in the effort to deliver uncompromising...

Product description Ash planks create a highly elegant and harmonious expression due to the extraordinary dimensions. An extravagant solution with clear references to the majestic Ash tree. 1 - 4 m (RL) Tonque & groove Dimension sketch Within the given intervals, the planks are combined on demand. You can choose between the following fixed lengths: 1,0 – 1,4 – 1,8 – 2,2 – 2,6 – 3,0 – 3,4 – 3,8 – 4,2 – 4,6 – 5,0 Random lengths Dinesen Ash in random lengths, 22 mm, comes in widths from 125 - 300 mm and in lengths up to 5 m. For planks in random lengths, you can expect an average length in the middle...

At Dinesen we view the installation as one of the most important parameters for a successful outcome. Wood is a hygroscopic material that absorbs and emits humidity from the environment, meaning that it will always adapt to an equilibrium level of humidity, determined by the temperature and relative humidity of the air. This makes correct installation essential. There are three different installation methods: “screwed from above”, “hidden screws” and “full-surface gluing”. No installation is inherently optimal in every situation, and the right choice will vary from one project to another. However,...

Description The planks are made of European Ash (mainly felled in Schwarzwald) Random lengths 1 - 3 m in random lengths 1 - 4 m in random lengths 2 - 5 m in random lengths (See list of cuts, page 3) Width 125, 150, 200, 250 & 300 mm. Tolerance: +/- 1,0 mm Right-angled 90 degrees +/- 0,1° degree Wood moisture content 8 - 10 % Finish front Sanded, grit 100 (treated according to Dinesen instruction “After installation”) Finish back Planed (may occur areas where full thickness is not achieved) Surface treatment Unfinished. To be sanded and finished on site Please also see the Declaration of Performance...

General About the planks The planks are supplied unfinished and have a moisture content of 8-10 %. Dinesen floor planks are CE-labelled in accordance with EN 14342. Delivery times Delivery times vary and may in some cases be considerable. For more information on delivery time, please contact Dinesen on +45 7455 2140. Storage If the floor planks are stored for a short period of time, they must be kept inside in a sealed, dry and warm room. Place the floor planks on joists and wrap them tightly in plastic - also underneath. Installation Always consult our instructions or contact our technical department...